Brayer BR3000BN [6/32] Cleaning and maintenance
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Brayer BR3000BN [6/32] Cleaning and maintenance

Brayer BR3000BN [6/32] Cleaning and maintenance
6
EN
• Wipe the unit with a clean, slightly damp cloth to
remove dust, and then wipe it dry.
• Unwind the power cord to its full length while using
the unit.
USING THE HAIRDRYER
• Make sure that the operation mode switch (1) is set
to the position «0».
• Unwind the power cord completely.
• Insert the power plug into the mains socket.
• Use the switch (1) to set the required operation
mode:
- «0» — the hot air styler is switched o󰀨;
- «1» — warm air supply;
- «2» — hot air supply.
• The button (2) is the cool shot function «
», press
and hold down the «cool» shot button for xing your
hairstyle.
• Note: — during the rst operation a foreign smell
and a small amount of smoke can appear from the
heating element, this is normal and it is not covered
by warranty.
• – After unit operation, switch the hairdryer o󰀨 by
setting the switch (1) to the position «0», and unplug
it.
NOZZLE
• Use the nozzle (3) when you need to focus the power
of drying on a small area (for example, a curl or a
wave) or when you want to straighten wavy hair.
• Attach the nozzle (3) to the unit body. The nozzle (3)
allows directing a narrow air ow of high intensity at a
denite hair lock.
• Insert the power plug into the mains socket. Use the
switch (1) to set the necessary operation mode.
• When the desired e󰀨ect is achieved, press the cool
shot button (3) and x your hairstyle.
• Periodically straighten the power cord if it gets
twisted during operation.
OVERHEATING PROTECTION
• Overheating protection switches the hairdryer o󰀨 if
the outgoing air is too hot.
• If the hot air styler is switched o󰀨 during operation,
set the switch (1) to the position «0», unplug the
unit and make sure that the air inlets and outlets are
unblocked.
• Let the unit cool down for 5-10 minutes and switch it
on again. Do not block the air inlets during operation
of the hot air styler and
• avoid getting of hair into the air inlet grid (5).
CLEANING AND MAINTENANCE
• The hairdryer is intended for household use only.
• Set the switch (1) to the «0» position, disconnect the
hairdryer from the mains and let it cool down.
• Wipe the unit body (4) with a slightly damp cloth, and
then wipe it dry.

Содержание

Похожие устройства

Скачать