P.I.T. PID03002-16M2/BL [2/21] Страница 2
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

P.I.T. PID03002-16M2/BL [2/21] Страница 2

P.I.T. PID03002-16M2/BL [2/21] Страница 2

Содержание

Похожие устройства

CORDLESS DRILL GENERAL SAFETY PRECAUTIONS 1 For safety reasons children under 18 years of age also persons who are not familiar with these rules should not use this tool Use the tool only for the direct purpose specified in the operation manual 2 The tool is not intended for use by persons including children with reduced physical sensory or mental abilities or lack of experience or knowledge unless they are under the control or instructed about the use of the tool by the person responsible for their safety 3 Children should be kept under control to prevent playing with the tool 4 Keep your workplace clean and tidy Disorder in the workplace may cause to injury 5 Do not use the tool in damp locations in a water vapor environment near storage areas for flammable liquids and gases 6 Make sure that there are no people nearby especially children and animals They can become victims of flying particles of material being processed by the tool 7 Work only in conditions of good visibility or provide the workplace with sufficient illumination 8 Each time before using the tool make an external inspection for damage especially for the electric cable of the charger and the plug of the plug and socket connection and the reliability of the attachment of the cutting nozzles drills A defective tool should not be used If damage is found repair the tool only in the technical service center Attention Do not use the tool if its control devices protective and interlocking devices are damaged worn or removed 9 The surface of the drill handle must be clean dry and not greasy 10 Attention The mains voltage below 220 V may cause a malfunction of the tool Pay attention to the mains voltage The power supply must comply with the required tool parameters 11 Regularly inspect the electric cable for damage and wear The tool can only be used when the electric cable is in good condition The electric cable can only be replaced at the technical service center 12 The mains plug socket must fully comply with the power plug of the power tool 13 The tool has double insulation This means that all external metal parts are electrically isolated from current carrying parts This is done by placing additional insulation between the electrical and mechanical parts This insulation system serves as an additional protection against injuries resulting from possible damage to electrical insulation inside the tool 14 During work do not wear loose clothes apparel etc cover long hair as all this can be captured by moving parts of the tool Wear strong non skid protective or a shoes protective strong mask a slacks safety respirator if gloves dust safety forms during goggles work normal protective glasses are not headphones at increased noise level a protective helmet in case of appropriate danger 15 Protect parts of your body especially fingers from possible contact with moving parts of the tool Wait until the parts of the tool are completely inert after turning it off do not try to stop them by hand 16 Do not overload the tool it works reliably and safely only if the parameters specified in its product specifications are observed Work with interruptions to prevent overheating For every 20 minutes of work let s 5 minutes of rest 17 Ensure that the ventilation holes slots in the electromotor case are always open and clean 18 Do not leave the tool unattended at the workplace Do not expose the tool to rain in the open air If the workplace gets very dusty ensure that it is sufficiently ventilated 19 Keep the tool in a clean dry and inaccessible place for children

Скачать