DWT HLP20-600 K 5.1.59 Инструкция по эксплуатации онлайн [8/64] 662302
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

DWT HLP20-600 K 5.1.59 Инструкция по эксплуатации онлайн [8/64] 662302

DWT HLP20-600 K 5.1.59 Инструкция по эксплуатации онлайн [8/64] 662302
8
English
• When working in open air, use extension cords
designed for this type of work, which will reduce the
danger of electric shock.
Personal protection recommendations
• Be cautious when working with power tools, and
carefully plan your actions. Do not use the tool when
fatigued, or under the inuence of drugs, alcohol or
medicines. Careless handling may result in serious
injuries.
• Use personal protection equipment. Always wear
protective goggles. When necessary, use respirators,
non-slipping boots, hard hats and earplugs. The use
of personal protection equipment is one of the factors
that reduce the risk of injuries.
• Avoid incidental activation of power tools. Before
inserting the plug, make sure that the power switch is in
OFF position. When carrying the tool, take your ngers
off the main switch, which will reduce the possibility of
incidental activation.
• Before switching on the tool, remove any wrenches
and other objects from its rotating parts. A wrench left
in the rotating unit may result in serious injuries.
• Do not apply excessive force, take a stable position
and always try to keep balance - this will facilitate
control over the tool.
• Do not wear loose clothes or freely-hanging
jewellery. Hair, parts of garment and gloves should
be protected against contact with moving parts of the
power tool.
• If the tool is equipped with a dust collection device,
make sure that the device has been activated and
used properly. Use of such devices helps reduce the
concentration of dust at the workstation.
Use and handling of power tools
• The persons with lowered psychophysical or men-
tal aptitudes as well as children can not operate the
power tool, if they are not supervised or instructed
about use of the power tool by a person responsible
for their safety.
• Do not overload the tool. Power tools are to be used
only in operations, to which they have been designed,
which will ensure safety and help achieve better
results.
• Do not use power tools with a damaged power
switch. A tool that cannot be switched on and off in a
controlled manner is potentially dangerous and must
be repaired immediately.
• Before adjustment operations, replacement of
attachments, and during storage, remove the power
tool plug from the mains socket. This eliminates the
risk of the tool being unintentionally activated.
• The tool should be stored out of children's reach.
Do not allow the use of power tools by persons who
have not read this manual and are inexperienced. In
the hands of an inexpert person, the tool may be dan-
gerous both for the operator and his environment.
• Take proper care of the tool condition. Monitor the
axial run-out and stability of movable parts' joints, and
pay proper attention at any faults that may result in the
tool damage. Bad condition of power tools is a frequent
cause of accidents.
• Cutting tools should be kept clean and must be well-
sharpened. Cutting tools with sharp cutting edges,
which are properly xed reduce the risk of seizure and
facilitate the control over power tools.
• When using power tools and its accessories, follow
the instructions listed in this manual. During work with a
specic type of power tools, follow recommendations,
taking into account operational conditions and the type
of job performed.
Service of power tools
Your power tool should be serviced only by qualied
specialists, with the use of recommended spare parts.
This will guarantee labour safety, when your tool is
being applied.
Safety guidelines during
power tool operation
Before commencing operation
• Never operate the power tool that is not properly
assembled or underwent the unapproved changes.
• The power tool must not be used in the areas with
dust and containing explosive gases and vapours of
aggressive substances.
• Using the power tool for drying hair is strictly
prohibited - the temperature of the hot air ow is much
higher than that that of a household hair-dryer - you
may be badly burnt.
• Using the power tool for removing paint containing
lead is prohibited.
• If you are going to thaw a water pipe, make sure that
this it is in fact a water pipe - not a gas one - because
heating a gas pipe may cause an explosion.
During operation
• Operating the power tool in the rain, snow or in high
humidity environments (bathrooms, saunas, etc.) is
prohibited.
• While operating do not point the nozzle at yourself,
other people or animals, and do not touch the nozzle
or the surface that you have heated - you may be badly
burnt.
• Do not close ventilation slots of the hot air gun, do
not close the nozzle of the hot air gun and do not hold
the nozzle too close to a work surface - this will cause
the power tool to overheat and break down.
• Ensure proper ventilation in the room where
operation will take place - gases and vapors generated
during operation may be harmful to your health.
• Wear safety goggles and gloves during operation.
• Do not direct the hot air ow to the same place for
a long period of time - heat treatment of lacquer and
paint coatings may produce highly ammable gases.
• Do not work next to highly inammable liquids,
gases and items (timber, paper, etc.).
• Beware of ignition of surrounding objects due to high
temperature of an air ow. Remember, invisible design
components (wooden beams, insulation materials,
etc.) can catch re as well.
• During a steady-state operation put the power tool
on a horizontal dry surface to avoid its toppling. Do not
leave the power tool running unattended.
After nishing operation
• After the nal shut-off, examine a place where works
were carried out, do not leave decaying subjects - they
can cause a re.

Содержание

Похожие устройства

Скачать