Denzel BLDL-IB-18-02 [5/28] Cordless drill driver

CORDLESS DRILL/DRIVER

c) While working with power tools do not keep close children or other people. A distraction may cause loss of

control over the work.

Electrical safety

a) A cable plug of an electric tool must match a power outlet. Never modify an electrical cable plug. Do not use

connecting adapter plugs, if there is a ground wire in the power cable of the electric tool. Usage of the original

cable plug and a corresponding power outlet reduces the risk of electric shock.

b) While working with electric tool avoid physical contact with grounded objects such as pipelines, radiators,

electric stoves and refrigerators. Electric shock risk increases if your body is grounded.

c) Do not use electric tool in the rain or in a humid environment. Water entering in the electric tool increases the

risk of electric shock.

d) Handle electrical cable with care. Never use the cable for carrying electric tool or pulling his plug out of the

receptacle. Do not expose electrical cable to high temperatures and lubricants; keep it away from sharp edges

and moving parts of the tool. Damaged or entangled cable increases the risk of electric shock.

e) While working with electric tool outdoors use an extension cable intended for outdoor use. Using the cable

suitable for working outdoors reduces the risk of electric shock.

f) While working with electric tool in a humid environment use a power supply equipped with a safety protective

shutdown device. The usage of this device reduces the risk of electric shock.

ATTENTION!

The use of a safety protective shutdown device with current of operation no more than 30 mA

is recommended.

Personal safety

a) While working with electric tools be careful, watch what you do, and use common sense. Do not use electric

tool, if you are tired, as well as being under the inuence of alcohol or drugs lowering the reaction and other

remedies. The slightest negligence may cause serious injury while working with electric tools.

b) While working use personal protective equipment. Always wear safety glasses. Timely use of protective

equipment such as: dust mask, boots with non-slip sole, safety hat or noise protection headphones, signicantly

reduces the risk of injury.

c) Do not allow unintended start. Before plugging in electric tool and/or connecting it to the battery lift or move

it, be sure the switch is in the “o” position. Do not carry electric tool with the trigger switch pressed and do not

plug the electric tool into a power outlet if the switch is set to "on". This may lead to an accident.

d) Before turning on the electric tool remove from it all adjusting keys or spanners. An adjusting key or spanner

left xed on the rotating part of the electric tool can cause severe injury.

e) Work in a steady posture. Always keep your balance and a steady posture. This will allow you not to lose control

when working with electric tool in an unexpected situation.

f) Dress properly. Do not wear loose clothing or jewelry while working. Make sure your hair, clothing or gloves are

at a constant distance from the rotating parts of the tool. Loose clothes, jewelry or long hair can get into the

rotating parts of the tool.

g) If the electric tool is equipped with a dust collection and removal device, make sure this device is properly

connected and used. The use of a dust removal device signicantly reduces the risk of an accident due to a

dusty working space.

Use of electric tools and technical care

a) Do not overload the electric tool. Use your tool for its intended purpose. The electric tool works safe and secure

only if you keep to the parameters specied in its technical specications.