Denzel BLDL-IB-18-02 [6/28] Cordless drill driver

CORDLESS DRILL/DRIVER

b) Do not use the electric tool if its switch cannot be set to the “on” or “o” position. Electric tool with a broken

switch is dangerous and must be repaired.

c) Unplug the electric tool from the power outlet and/or remove battery before adjusting, replacement of

accessories or when storing electric tool. Such precautions reduce the risk of an accidentally turning on of the

electric tool.

d) Store unused electric tools out of the reach of children and do not let persons who are not familiar with electric

tool or these instructions work with electric tools. Electric tools are dangerous in the hands of inexperienced

users.

e) Check an electric tool regularly. Check alignment accuracy and ease of movement of moving parts, integrity of

parts and any other elements of the electric tool aecting its work. Do not use a broken electric tool until it is

completely repaired. Most accidents are the result of insucient maintenance of the electric tool.

f) Watch out for sharpness and cleanness of cutting accessories. Sharp-edged accessories allow avoiding jamming

and make work less tiring.

g) Use electric tool and accessories in accordance with this manual and taking into account the working conditions

and nature of future work. Misuse of the electric tool can create a hazardous situation.

Maintenance

Your electric tool must be repaired only by qualied specialists using original spare parts. This will ensure safety

and reliability of your electric tool in further use.

Special safety warnings when working with battery machines

a) Battery charge should be done using the charger specied by the manufacturer (supplied). Charger suitable for

one type of battery may cause re when using a dierent type of battery;

b) Power supply of tools should be carried out only from rechargeable batteries compatible with this model of

machine and recommended by the manufacturer. Using any other batteries may cause damage and re;

с) If the battery is not used keep it separate from the machine and metal objects such as paper clips, coins, keys,

nails, screws, etc. that can accidentally close the contact pins. Short circuit of the contact pins of the battery may

cause burns or re;

d) The machine has an independent power source (battery) and always ready to go. Avoid pressing the switch

accidentally – it may cause injury and other damage;

e) Do not open the battery; there is a danger of a short circuit, which could cause re or explosion;

f) Protect the battery from high temperatures, prolonged exposure to direct sunlight and re. There may be an

explosion hazard;

g) When performing operations in which the contact of fasteners (twisted screws or screws) with hidden wiring is

possible, hold the machine only on insulated surfaces designed to hold by hand. When they come into contact

with the live wire, accessible metal parts of the machine are energized, whereby the operator may be shocked

by electrical current;

h) Use appropriate metal detectors and detectors to determine the locations of hidden wires and / or ask for

help to the appropriate public utility. Contact with electrical wiring may cause electric shock and re; pipeline

damage – to an explosion; damage to plumbing – to property damage;

i) Hold the machine rmly in your hands. When screwing /unscrewing screws, high reactive moments may occur

for a short time;

j) The workpiece must be secured in the clamping devices or vice; thus, it is held more securely than in the hands;

k) Do not let the machine out of your hands until a complete stop of the working tool. Rotating tooling on an

uncontrolled machine may cause injury or damage to property.