Denzel RH-650-18 [6/28] Rotary hammer
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Denzel RH-650-18 [6/28] Rotary hammer

Denzel RH-650-18 [6/28] Rotary hammer
5
ROTARY HAMMER
EN
of control. When chiseling, parts from hard materials such as reinforcing bars may be dangerous as well. Tighten
the auxiliary handle seafely before starting work.
• Continuous work with this electric tool during a long period of time is not allowed. Vibration produced during
hammering may cause harm to your hands or feet. Use gloves for better anti-vibration protection and limit the
eects of vibration, taking frequent breaks in work.
• Do not attempt to repair the working tooling by yourself. Repair must be carried out by a qualied technician.
Chisels, drill bits, etc. which are restored may cause injury or tool failure.
• Wear gloves when working with electric tool or when changing the tooling. Working tooling may become very
hot during the work and cause burns to unprotected hands.
• Never lay the tool until the full stop of the tooling. Rotating chisel or drill can cause injury.
• Never hit with a hammer on jammed tooling trying to free it. Particles of the workpiece or metal shavings may
bounce o and cause injury.
• Hold electrical cable away from the rotating working tool. Do not wrap the cable around any part of your body.
Electrical cable, wound on a rotating working tooling, may cause loss of control of the tool and serious injury.
ATTENTION: It is recommended to use a safety shutdown device with actuation current not more
than 30 mA.
Residual risks
In spite of the compliance with relevant safety means instructions and use of safety devices, some residual risks
cannot be completely eliminated. They are:
• injuries caused by touching hot or rotating instrument parts;
• impairment of hearing;
• risk of pinching ngers when changing working tool;
• damage to health due to vibration appearing at work;
• damage to health due to inhalation of dust when working with concrete and/or bricks.
HANDLING INSTRUCTIONS
General view of the tool is shown in picture 1.
1
10
2
4 5 8
6
7
11
12
2
3
9
1. Bearing box for the working tool SDS-plus.
2. Working mode switch.
3. Fixing mechanism of the mode switch.
4. Gear housing.
5. Engine housing.
6. Switch key.
7. Switch hold button.
8. Rotation direction switch.
9. Side handle.
10. Drilling depth limiter.
11. Speed regulator / limiter.
12. Power Indicator.
picture 1.
Electrical Rotary Hammer represents an impact rotary machine consisting of electric drive and actuator. An electric
drive of the electrical rotary hammer is an alternating current collector motor housed in a plastic case. Actuating
mechanism driving the working tool consists of an impact mechanism combination of the vacuum compression
type (creating a directional impact without returning) and a rotation drive.

Содержание

Похожие устройства

Скачать