Denzel OS-125 [7/24] Random orbit sander
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Denzel OS-125 [7/24] Random orbit sander

Denzel OS-125 [7/24] Random orbit sander

Содержание

Похожие устройства

RANDOM ORBIT SANDER DEHZEL Description Random Orbit Sander consists of a drive located in a plastic housing in which the motor is vertically mounted on the output shaft of which the possibility of fixing the tooling is provided Motor rotation axis is normal to the treated surface The electric drive is the collector AC motor When rotating the motor shaft the soleof the tool makes rotational and oscillatory movements with an amplitude of 2 mm which provides sanding The combination of rotation and vibration of the base changeable depending on the degree of pressing the machine to the treated surface allows this type of machine providing improved performance Sanding is carried out using an abrasive sheet on a paper or cloth basis sanding paper fixed on the base z ui A ATTENTION Always disconnect the power cable from the electrical outlet before preparing for the opera tion adjustment maintenance of power tools Installation removal of the tooling A ATTENTION It is necessary to use sanding discs designed for work on random orbit sanders Apply sanding sheet with abrasive side out on the base of the machine aligning their edges around the contour and comparing the holes for collecting dust in the sanding sheet and the base of the machine Use only high quality sanding sheets as it improves processing quality and reduces sanding time To remove a thick layer of material use coarse grades of paper with a grain size of 40 60 80 units Use paper with a grain size of 150 320 units for finishing sanding Place the sanding sheet on the tool base so that the paper covers the entire sole Never use your tool without sanding A ATTENTION Do not turn on the sander if it is in contact with the surface to be treated otherwise you can spoil the workpiece Power connection L ATTENTION The electric tool should be connected only to the single phase AC which voltage corresponds to the voltage indicated in the specification and label placed on the tool housing If the rating plate indicates voltage of 230V then the power tool can also be switched on to a supply with a voltage of 220 V When working outdoors use industrial extension cords intended for outdoor use Do not use homemade extensions When working outdoors connect power tools to the power circuit equipped with a differential automatic with a response current of not more than 30 MA this will reduce the risk of electric shock When connecting ensure that the insulation of the electrical cable and the power plug of the machine are intact Make sure the machine s power switch is in the off position This power tool can be connected to power outlets that do not have the protective ground since it has double insulation protection class II

Скачать