Denzel OS-125 [8/24] Dehzel
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Denzel OS-125 [8/24] Dehzel

Denzel OS-125 [8/24] Dehzel

Содержание

Похожие устройства

DEHZEL RANDOM ORBIT SANDER Adjusting the frequency of rotation I oscillation of the base Depending on the type of tooling used the type of material being processed and the nature of processing you can choose the optimum frequency of rotation of the machine base Selection is made using the speed controller 7 pic 1 The numbers on the regulator ring correspond to the ring positions n and do not indicate specific speed expressed in revolutions per minute Adjustment of the rotational speed of the base can be done with the engine running including under load ATTENTION Do not overload the machine operating at reduced speeds When reducing the frequency of rotation of the rotor of the engine the cooling of the machine deteriorates z LU Before getting started you must inspect the tool and make sure it is complete and there is no external damage make sure that the power switch is working correctly after transportation in winter conditions before switching on keep the machine at room temperature until the condensate is completely dry Getting started you must attach dust collector 5 pic 1 make sure that the power switch 3 pic 1 is in the position OFF then connect the machine to the power supply test the machine at idle also after the replacement of the sanding wheel To turn the machine on it is necessary to turn the power switch 3 pic 1 to the on position To turn off the machine turn the power switch 3 pic 1 to the Off position While working after turning on the engine let the machine develop the set speed of the tooling and only after that you enter the tooling and the workpiece into contact clean the dust collector regularly Accumulated dust does not only increase the load on the engine of the machine but also reduces the efficiency and quality of processing always use the machine only for the types of work for which it is intended When processing wood metal and other materials use only equipment designed for this material safety of use of which at the sanding machine is no doubt do not allow mechanical damage shock falling of the tool on hard surfaces etc protect the machine from exposure to intense heat sources or chemically active substances as well as from the ingress of liquids and foreign solid objects inside the machine do not block or obstruct the ventilation openings in the machine housing turn the machine off using the switch before connecting disconnecting from the power supply monitor the condition of the tooling and the heating of the electric motor At the end of the work disconnect the tool from the power supply making sure the switch is in the off position clean the machine and dust collector from dirt and dust Recommendations for use Before you start processing a part you must fix it especially if it has a light weight Holding the tool firmly by the handle gently press down the sander to the work surface so that the sanding sheet touches it evenly over the entire area With minimal pressure of the machine to the surface to be treated the base performs mainly rotational movements with significant pressure the rotational component of the movement of the sole decreases and the vibration dominates By changing the pressure on the tool you can achieve that ratio of rotation and vibration of the base at which the processing efficiency will be maximum

Скачать