Denzel HG-1800 [5/28] Maintenance
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Denzel HG-1800 [5/28] Maintenance

Denzel HG-1800 [5/28] Maintenance
5
HOT AIR GUN
EN
Personal safety
a) While working with electric tools be careful, watch what you do and use common sense. Do not use electric
tool if you are tired, as well as being under the inuence of alcohol or drugs lowering the reaction and other
remedies. The slightest negligence may cause serious injury while working with electric tools.
b) While working use personal protective equipment. Always wear safety glasses. Timely using of protective
equipment such as: dust mask, boots with non-slip sole, safety hat or noise protection headphones, signicantly
reduces the risk of injury.
c) Do not allow unintended start. Before plugging in electric tool and/or connecting it to the battery lift or move
it, be sure the switch is in the “o” position. Do not carry electric tool with the trigger switch pressed and do not
plug the electric tool into a power outlet if the switch is set to "on". This may lead to an accident.
d) Before turning on the electric tool remove from it all adjusting keys or spanners. An adjusting key or spanner
left xed on the rotating part of the electric tool can cause severe injury.
e) Work in a steady posture. Always keep your balance and a steady posture. This will allow you not to lose control
when working with electric tool in an unexpected situation.
f) Dress properly. Do not wear loose clothes or jewelry while working. Make sure your hair, clothing or gloves are
at a constant distance from the rotating parts of the tool. Loose clothes, jewelry or long hair can get into the
rotating parts of the tool.
g) If the electric tool is equipped with a dust collection and removal device, make sure this device is properly
connected and used. The use of a dust removal device signicantly reduces the risk of an accident due to a
dusty working space.
Use of electric tools and technical care
a) Do not overload the electric tool. Use your tool for its intended purpose. The electric tool works safe and secure
only if you keep to the parameters specied in its technical specications.
b) Do not use the electric tool if its switch cannot be set to the “on” or “o” position. Electric tool with a broken
switch is dangerous and must be repaired.
c) Unplug the electric tool from the power outlet and/or remove battery before adjusting, replacement of accessories or
when storing electric tool. Such precautions reduce the risk of an accidentally turning on of the electric tool.
d) Store unused electric tools out of the reach of children and do not let persons who are not familiar with
electric tool or these instructions work with electric tools. Electric tools are dangerous in the hands of
inexperienced users.
e) Check an electric tool regularly. Check alignment accuracy and ease of movement of moving parts, integrity of
parts and any other elements of the electric tool aecting its work. Do not use a broken electric tool until it is
completely repaired. Most accidents are the result of insucient maintenance of the electric tool.
f) Watch out for sharpness and cleanness of cutting accessories. Sharp-edged accessories allow avoiding jamming
and make work less tiring.
g) Use electric tool and accessories in accordance with this manual and taking into account the working conditions
and nature of future work. Misuse of the electric tool can create a hazardous situation.
Maintenance
Your electric tool must be repaired only by qualied specialists using original spare parts. This will ensure safety
and reliability of your electric tool in further use.
Additional security measures for hot air guns
a) Hold the tool rmly in both hands when working. If this rule is not followed, the operation of the power tool
becomes dangerous.
b) Keep the power cord away from the nozzle and red-hot tooling. If you lose control of your electric tool, the
power cord may be damaged, which could cause a short circuit and re.
c) Do not use the tool in the presence of an explosive atmosphere. Keep in mind that heat can be transferred to
combustible materials, which are out of sight.
d) After use place the device on a rm, at surface with the nozzle facing up, let it cool before storing.
e) Do not leave the device unattended when it is turned on.

Содержание

Похожие устройства

Скачать