Denzel AG180-2000 [10/32] Angle grinder
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Denzel AG180-2000 [10/32] Angle grinder

Denzel AG180-2000 [10/32] Angle grinder
10
ANGLE GRINDER
EN
When working outdoors use industrial extension cords intended for outdoor use. Do not use homemade
extensions. When working outdoors connect power tools to the power circuit equipped with a dierential
automatic with a response current of not more than 30 мА, this will reduce the risk of electric shock.
When connecting ensure that the insulation of the electrical cable and the power plug of the machine is intact.
Make sure the machine's power switch is in the “o” position. This power tool can be connected to power outlets
that do not have a protective ground, since it has double insulation (protection class II).
Spindle speed adjustment (for model AG-125-1100A)
Depending on the type of tooling used, the type of material being processed and the nature of processing you
can choose the optimal spindle speed of the machine. The selection is made using the controller 5 (pic. 1). The
numbers on the regulator ring correspond to the ring positions and do not indicate a specic speed, expressed in
rotations per minute. A higher number corresponds to a higher spindle speed and tooling.
ATTENTION!
The machine is not intended for polishing work.
ATTENTION!
Do not overload the machine operating at reduced speeds. When the engine rotor speed
decreases, the cooling of the machine deteriorates.
Before using you must:
•
inspect and verify its completeness and no external damage;
•
make sure the power switch works correctly;
•
after transportation in winter conditions before turning on, leave at room temperature until complete drying
of water condensate.
Before getting started, you must:
•
set the handles and protective cover in a convenient for work position;
•
check the tightness of the threaded connection of xing the tooling;
•
turn the spindle with a tooling by hand: his move must be free without jams;
•
try the machine at idle (also after replacing the grinding wheel);
•
make sure that the power switch is in the “o” position, then connect the machine to the mains.
To turn on the machine, press the switch key 8 (Fig. 1) when the button 7 (Fig. 1) is pressed. To turn o the
machine, release the key 8 (Fig. 1).
ATTENTION!
The protective cover should always be installed during operation. Always use safety glasses.
While working:
•
after turning on the engine, let the machine develop the set speed of the tooling and only after that you enter
the tooling and the workpiece into contact.
•
always use the machine only for the types of work for which it is intended. When processing wood, use only the
designated tooling, safety of use of which on an angle grinder, no doubt.
ATTENTION!
Never use saw blades designed for circular saws on angle grinders. It is extremely dangerous!

Содержание

Похожие устройства

Скачать