Denzel JS-80 [5/28] Electrical jig saw
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Denzel JS-80 [5/28] Electrical jig saw

Denzel JS-65 [5/28] Electrical jig saw
5
ELECTRICAL JIG SAW
EN
Workplace safety
a) Keep the workplace clean and provide it with good light. Poor light or mess at workplace may lead to an
accident.
b) Do not use power tools if there is a danger of re or explosion, for example, near ammable liquids, gas or dust.
During work electric tools give up sparks, which can ignite dust or ammable vapors.
c) While working with power tools do not keep close children or other people. A distraction may cause loss of
control over the work.
Electrical safety
a) A cable plug of an electric tool must match a power outlet. Never modify an electrical cable plug. Do not use
connecting adapter plugs, if there is a ground wire in the power cable of the electric tool. Usage of the original
cable plug and a corresponding power outlet reduces the risk of electric shock.
b) While working with electric tool avoid physical contact with grounded objects such as pipelines, radiators,
electric stoves and refrigerators. The risk of electric shock increases if your body is grounded.
c) Do not use electric tool in the rain or in a humid environment. Water entering into the electric tool increases
the risk of electric shock.
d) Handle electrical cable with care. Never use the cable for carrying electric tool or pulling its plug out of the
receptacle. Do not expose electrical cable to high temperatures and lubricants; keep it away from sharp edges
and moving parts of the tool. Damaged or entangled cable increases the risk of electric shock.
e) While working with electric tool outdoors use an extension cable intended for outdoor use. Using the cable
suitable for working outdoors reduces the risk of electric shock.
f) While working with electric tool in a humid environment use a power supply equipped with a safety protective
shutdown device. The usage of this device reduces the risk of electric shock.
g) If you need to work with power tools in a humid environment use a power source equipped with a residual
current device (RCD). Using an RCD reduces the risk of electric shock.
h) Hold electric tool for insulated handles when performing operations during which working tooling can touch
the hidden wiring or its own cable. A contact with live wire may cause voltage on metal parts of electric tool,
which creates danger of electric shock.
ATTENTION!
It is recommended to use a residual current device (RCD) with response current not exceeding
30 mA.
Personal safety
a) While working with electric tools be careful, watch what you do and use common sense. Do not use electric
tool if you are tired, as well as being under the inuence of alcohol or drugs lowering the reaction and other
remedies. The slightest negligence may cause serious injury while working with electric tools.
b) While working use personal protective equipment. Always wear safety glasses. Timely using of protective
equipment such as: dust mask, boots with non-slip sole, safety hat or noise protection headphones, signicantly
reduces the risk of injury.
c) Do not allow unintended start. Before plugging in electric tool and/or connecting it to the battery lift or move
it, be sure the switch is in the “o” position. Do not carry electric tool with the trigger switch pressed and do not
plug the electric tool into a power outlet if the switch is set to "on". This may lead to an accident.
d) Before turning on the electric tool remove from it all adjusting keys or spanners. An adjusting key or spanner
left xed on the rotating part of the electric tool can cause severe injury.
e) Work in a steady posture. Always keep your balance and a steady posture. This will allow you not to lose control
when working with electric tool in an unexpected situation.
f) Dress properly. Do not wear loose clothes or jewelry while working. Make sure your hair, clothing or gloves are
at a constant distance from the rotating parts of the tool. Loose clothes, jewelry or long hair can get into the
rotating parts of the tool.

Содержание

Похожие устройства

Скачать