BLACK & DECKER G720 [14/16] Overload

More user manuals on ManualsBase.com

• Press in the spindle lock button and rotate the spindle until it locks (Fig. 3). Keeping the lock button pressed in, tighten the outer flange with the

spanner provided.

FITTING SANDING DISCS (FIG. 4)

• Use a sanding disc with the backing pad for sanding with your angle grinder.

• Disconnect the plug from the electricity supply.

• Remove the guard.

• Place the flange on the spindle. Place the backing pad on the spindle and inner flange, ensuring it is correctly located.

• Mount the fibre backed abrasive disc on the backing pad.

disc and avoids unnecessary overloading.

OVERLOAD

Overloading will cause damage to the motor of your angle grinder. This can happen if your angle grinder is subjected to heavy duty use for

prolonged periods of use. Do not in any circumstances, attempt to exert too much pressure on your angle grinder to speed up your work.

The abrasive discs operate more efficiently when a light pressure is exerted, thus avoiding a drop in the speed of your angle grinder (see Tool care).

TOOL CARE

Keep guards, air vents and the motor housing as clear as possible of dust and dirt. Wipe with a clean cloth and blow through with a low-pressure

air supply. Excessive build-up of metal dust can cause tracking of electrical current from the internal parts to exposed metal parts. Do not overload

your angle grinder. Overloading causes a reduction in speed and efficiency, causing your angle grinder to become too hot. If this happens, operate

your angle grinder under no load for one or two minutes until it has cooled to normal operating temperature. Switching your angle grinder off

should be performed by authorized service centers or other qualified service personnel, always using identical replacement parts.

ACCESSORIES

Recommended accessories for use with your tool are available from your local dealer or authorized service center.

PROTECTING THE ENVIRONMENT

Separate collection. This product must not be disposed of with normal household waste.

Should you find one day that your Black & Decker product needs replacement, or if it is of no further use to you, do not dispose of it with

household waste. Make this product available for separate collection.

Separate collection of used products and packaging allows materials to be recycled and used again. Re-use of recycled materials helps

prevent environmental pollution and reduces the demand for raw materials. Local regulations may provide for separate collection of elec-

trical products from the household, at municipal waste sites or by the retailer when you purchase a new product.