Sinbo SHB-3082 Инструкция по эксплуатации онлайн [13/75] 83538

- 12 -

Processing table

Ingredients Recommended quantity Recommended processing time / speed

Onions (quartered) 100 g Pulse/TURBO

Garlic (whole cloves) 100 g Pulse/TURBO

Walnuts 50 g 2 x 8 sec. TURBO

Almonds 50 g 1 x 10 sec. (coarse) 1 x 30 sec. (fine) TURBO

Cheese (e.g. Gouda, cold) 100 g 4 x 15 sec. TURBO

Salami 130 g 3 x 5 sec. TURBO

• Depending on the quantities and consistency of the foods, the actual values may differ.

• Repeatedly check the results, depending on how small you want to chop the food.

• Work using short pulses (1 pulse: press for approx. 1 second).

Assembling the device

CAUTION: Depending on the hardness and consistency of the food, do not fill the vessel 7 up to the

maximum level, as this can cause the blade insert 6 to become blocked.

Pay attention here to the guideline values for various foods in the "Processing table" section.

1. Place the vessel 7 on the vessel cover 9.

2. Place the blade insert 6 on the spindle 8 in the vessel.

3. Place the prepared food into the vessel7.

Shredding

• Figure C: In order to work at normal speed, press the motor block 3 down and then release it again.

• Figure D: In order to work at high speed, additionally press down on the TURBO 1 button.

• Work using short pulses (1 pulse: press for approx. 1 second). The number and length of the pulses

will depend on the quantity and consistency of the food. See the specifications given in the "Processing

table" section.

• Repeatedly check the result. If the food is not being chopped evenly:

- Pull out the mains plug 2, remove the motor block 3 and thoroughly shake the vessel 7.

- If food is sticking to the inside wall of the vessel, rotate the working cover 4 anti-clockwise and remove

it. Push the pieces downwards using a spatula.