STATUS RH750CE [10/40] Maintenance

Using the template guide (Fig. G)

The template guide is designed to help cut the workpiece as the shape of the template

board. With a template, it is handy to process a number of workpiece of identical shape.

• Loosen the screws and remove the base plate(8a).

• Attach the template guide (19) onto the base (8).

• Place the base plate (8a) back and tighten the screws .

• Stably x the template board (not provided) onto the workpiece.

• Place the trimmer on the template board and keep the template guide(19) moving

along the edge of the template board.

OPERATION

MAINTENANCE

GENERAL INSPECTION

Regularly inspect all fasteners and ensure they are properly tightened. Should any of the

screws be loose, retighten it immediately to avoid hazards.

If the replacement of the supply cord is necessary, this has to be done by the manufacturer

or his agent in order to avoid a safety hazard.

CLEANING

For safe operation always keep the machine and its ventilation slots clean.

Regularly check to see if any dust or foreign matter has entered the ventilation slots and the

grills around the switches. Use a soft brush and/or air jet to remove any accumulated dust.

MAINTENANCE

Wear safety glasses to protect your eyes whilst cleaning.

Exterior plastic parts may be cleaned with a damp cloth and mild detergent if necessary.

WARNING!

Never use alcohol, petrol or other cleaning agent. Never use caustic agents to

clean plastic parts. Water must never come into contact with the tool.

REPLACEMENT PARTS

To assure product safety and reliability, repairs, maintenance and adjustment (including

brush inspection and replacement) should be performed by authorised service centres

always using genuine replacement parts.