Ada 6D Servoliner GREEN А00500 Инструкция по эксплуатации онлайн [5/24] 672927

5English

2. It is possible to use charger to operate with the instrument. Use

charger for rechargeable batteries. Connect the charger to the hole

that is located on the housing of the line laser. Then connect it to the

main power. The line laser is in working condition and rechargeable

batteries are charging.

WARNING: Never use charger for ordinary batteries. Do not

leave the line laser unattended while using charger. Parameters

of the charger must correspond to the parameters of domestic

electricity. Output voltage must be no more than 6V.

3. Set up the lione laser on the oor or the tripod. When using tripod,

screw the tripod screw into the centering hole.

4. Press button (1) to switch on the line laser. Press buttons H (7) and

V (5) to switch and select vertical and horizontal lines. Switch o the

unnecessary lines to save battery power.

Variants of projections:

H button:

- 1 horizontal line (sector 120º)

- 2 horizontal lines (sector 180º)

- 4 horizontal lines (sector 360º)

V button:

- one vertical line and plumb down

- two vertical lines and plumb down

5. Switch On the line laser. If the LED is light and the laser beam begins

to blink, the deviation of the line laser from the horizontal plane is

more than ±3º. Adjust the line laser with the he;p of adjustable legs.

6. Place the line laser on the oor or tripod. When using tripod, screw

the tripod screw into the centering hole. Aim the plumb down on the

object on the oor. Then adjust the line laser with the help of ne

adjustment switch. Rotate the upper part of the line laser to adjust

the vertical lines.