Sinbo SFH-3389 [10/43] Assembly instructions

- 9 -

ASSEMBLY INSTRUCTIONS

5. Screw off spherical nut from the castor, align the shaft to the hole of the castor mounting plate, insert in, and

screw on the spherical nut.

6. Repeat 2, 3, 4 and 5 on the rear of radiator for mounting of the rear castors.

Note: the rear castors must be mounted between the end two fins.

INSTRUCTIONS FOR USE

1. Before using the heater, make sure that it is on a flat and stable surface.

Damage may occur if it is placed on an incline or decline.

2. Set all the controls to OFF position and insert the plug into a socket-outlet with well grounded. Be sure that

plug fits firmly.

3. Rotate the thermostat knob clockwise to MAX position and switch the heater on as follow: the switch I for low

heat, the switch II for medium heat and both switches on for high heat.

4. When your room reaches the desired temperature, now slowly rotate the thermostat knob counter clockwise

until the pilot light goes out. The thermostat can now be left at this setting. As soon as the room temperature

has dropped below the set temperature, the unit will switch it self on automatically until the set temperature

has been reached again. In this way the room temperature remains constant with the most economical use of

electricity.

5. If you want to change the room temperature setting, rotate the thermostat knob clockwise to raise the

temperature, or counter clockwise to lower it.

6. This heater includes an overheat protection system that shuts off the heater when parts of the heater are

getting excessively hot.

7. To completely shut the heater off, turn all the controls to OFF, and remove plug from the socket-outlet.

MAINTENANCE

1. Always remove the plug from the socket-outlet and allow the radiator to cool down before clean the heater.

2. Wipe radiator with a soft damp (not wet) cloth.

WARNING:

Do not immerse the heater in water.

Do not use any cleaning chemicals such as detergents and abrasives.

Do not allow the interior to get wet as this could create a hazard.

3. To store away the heater, wind the cable round bobbin and store the heater in a clean dry place.

4. In case of malfunction or doubt, do not try to repair the radiator yourself, it may result in a fire hazard or

electric shock.

CONFORMITY WITH DIRECTIVES

This product is CE marked to denote conformity with Directives 2006/95/EC (Low Voltage) and the EMC directive

(2004/108/EC), as amended.

Correct Disposal of this product

This marking indicates that this product should not be disposed with other

household wastes throughout the EU. To prevent possible harm to the

environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the

sustainable reuse of material resources. To return your used device, please use the return and collection systems

or contact the retailer where the product was purchased. They can take this product for environmental safe

recycling.