Sinbo SFH-3389 [9/43] Important safeguards

- 8 -

IMPORTANT SAFEGUARDS

agent who should be contacted if there is an oil leakage.

21. Regulations concerning the disposal of oil when scrapping the appliance have to be followed.

22. The heater should not be used in a room, of which the floor area is less than 5 M2.

23. The cord shouldn’t be placed nearby the hot surface of the appliance.

24. This appliance is not intended for use by persons (including children) with reduced physical, sensory

or mental capabilities, or lack of experience and knowledge, unless they have been given supervision

or instruction concerning use of the appliance by a person responsible for their safety.

FOR HOUSEHOLD USE ONLY

SAVE THESE INSTRUCTIONS

SPECIFICATIONS

1. Control panel

2. Carry handle

3. Temperature knob

4. Power selector

5. Radiant fins

6. Castor

7. Cord storage

• Adjustable thermostat

• Wheels for convenient moving

• High temperature protection system

• Thermostatıc control

• Intergrated handle

• Cord storage

• Monuted on castors

• AC230V, 50Hz, 2500W

ASSEMBLY INSTRUCTIONS

The heater is packaged with the feet unattached. You must attach them before operating the heater.

WARNING: Do not operate without feet attached. Do operate the heater only in upright position (feet

on the bottom, controls on the top), any other position could create a hazardous situation.

1. Place the radiator body upside-down on a scratch-free location, make sure it is stable and will not

fall.

2. Screw off the wing nuts from the U-shaped bolt provided, attach the U-shaped bolt to the U-facing

flange between first and second fins (near the front cover).

3. To attach the castor mounting plate to the radiator body, you should insert the threaded ends of the

U bolt in the holes on the castor mounting plate.

4. Screw the wing nuts back to the U bolt and fasten the wing nut properly.

Note: Do not over tighten, which may cause the damage of radiator flange.