Град-М ДА-18х2ДКС [15/28] Environment

• Do not use battery when damaged; it should be re-

placed immediately

• Do not disassemble charger or battery

• Do not attempt to recharge non-rechargeable batter-

ies with the charger

WHEN CONNECTING NEW 3-PIN PLUG (U.K. ONLY):

• Do not connect the blue (= neutral) or brown (= live)

wire in the cord of the charger to the earth terminal of

the plug

• If for any reason the old plug is cut off the cord of the

charger, it must be disposed of safely and not left

unattended

To ensure longer service life and proper

performance of the battery, take the following

actions when you start using new battery:

1. Use the new battery, without recharging it, till its

complete discharge.

2. Then charge the battery for 3-5 hours.

3. Repeat abovementioned actions (1 and 2) 3-5 times

to reach the nominal battery capacity.

MAINTENANCE

Make sure that the machine is not live when

carrying out maintenance work on the motor.

Regularly clean the machine housing with a soft cloth,

preferably after each use. Keep the ventilation slots free

from dust and dirt.If the dirt does not come off use a soft

cloth moistened with soapy water. Never use solvents

such as petrol, alcohol, ammonia water, etc. These sol-

vents may damage the plastic parts.

The machine requires no additional lubrication.

Should a fault occur, e.g. after wear of a part, please

contact your local dealer.

ENVIRONMENT

In order to prevent the machine from damage during

transport, it is delivered in a sturdy packaging. Most of

the packaging materials can be recycled. Take these

materials to the appropriate recycling locations. Take

your unwanted machines to your local dealer. Here they

will be disposed of in an environmentally safe way.

NiCd batteries can be recycled. Deliver them to a dis-

posal site for chemical waste so that they can be re-

cycled or disposed of in an environmentally friendly

manner.