Home
Главная
Град-М
Шуруповерты И Винтоверты
ДА-18х2ДЗСК
Инструкция по эксплуатации Страница: 15

Град-М ДА-18х2ДЗСК [15/28] Environment

DURING USE

• Always keep the cord away from moving parts of the

tool; direct the cord to the rear, away from the tool

• If the cord is damaged or cut through while working,

do not touch the cord, but immediately disconnect the

plug; never use the tool with a damaged cord

• Push spindle-lock button (4) only when spindle (1) is

at a standstill

• Keep hands away from rotating accessories

• When grinding metal, sparks are generated; keep

other persons and combustible material from work

area

• In case of electrical or mechanical malfunction, im-

mediately switch off the tool and disconnect the plug

• In case the cutting disc is blocked, resulting in jerking

forces on the tool, immediately switch off the tool

• In case of current interruption or when the plug is ac-

cidentally pulled out, unlock the on/off switch (8) imme-

diately and put it in the OFF-position in order to prevent

uncontrolled restarting

• Do not apply so much pressure on the tool that it

comes to a standstill

AFTER USE

• Before you put down the tool, switch off the motor

and ensure that all moving parts have come to a com-

plete standstill

• After switching off the tool, never stop the rotation of

the accessory by a lateral force applied against it

WHEN CONNECTING NEW 3-PIN PLUG (U.K. ONLY):

• Do not connect the blue (= neutral) or brown (= live)

wire in the cord of this tool to the earth terminal of the

plug

• If for any reason the old plug is cut off the cord of

this tool, it must be disposed of safely and not left unat-

tended

Your machine is double insulated in accord-

ance with EN 50144; therefore no earthwire

is required.

MAINTENANCE

Make sure that the machine is not live when car-

rying out maintenance work on the motor.

Regularly clean the machine housing with a soft cloth,

preferably after each use. Keep the ventilation slots free

from dust and dirt.If the dirt does not come off use a soft

cloth moistened with soapy water. Never use solvents

such as petrol, alcohol, ammonia water, etc. These sol-

vents may damage the plastic parts.

The machine requires no additional lubrication.

Should a fault occur, e.g. after wear of a part, please

contact your local dealer.

ENVIRONMENT

In order to prevent the machine from damage during

transport, it is delivered in a sturdy packaging. Most of

the packaging materials can be recycled. Take these

materials to the appropriate recycling locations. Take

your unwanted machines to your local dealer. Here they

will be disposed of in an environmentally safe way.

Град-М ДА-18х2ДЗСК [15/28] Environment

Содержание

Похожие устройства