Kadzama mini Инструкция по эксплуатации онлайн [19/33] 678509

uniformity of heating, you can stick a piece of masking tape on

each of the walls and use a pyrometer to measure the

temperature after turning on the bowl and letting it reach the

set temperature (remember that the pyrometer cannot

correctly measure temperature from reflective metal

surfaces);

— If the bowl still continues to heat up or there are other

deviations after reaching the set temperature, it’s

recommended to do the initial setting of the controller and then

the calibration;

— If all of the above conditions are met, and the equipment

cannot be restored to work, please inform the KADZAMA

manager about all the steps you have done for further

consultation.

Initial parameter setting:

First you must unlock the settings, to do this use the relevant

section below. Then turn on the device, press the MODE

button on the controller and hold it until the PAr2 parameter

appears on the screen, release the button.

Control:

Using the MODE button select the code, change the value

with the «up» button, press the MODE button again to save

the value.