Graco Ultra Max II 695 17E633 [6/22] Not used on 16x414 17h823 17h832
![Graco Ultra Max II 695 17E633 [6/22] Not used on 16x414 17h823 17h832](/views2/1899673/page6/bg6.png)
Service
6 3A6583A
5. Remove piston rod from sleeve, or remove sleeve
from cylinder. Mark IV and Mark VII models:
Remove sleeve spacer (232) from sleeve.
6. Unscrew piston valve from piston rod. Clean and
inspect parts. The piston has a special thread
locking/sealing patch. Do not remove the patch. The
patch allows four disassembly/assembly procedures
before it is necessary to apply thread sealant to the
threads.
7. Remove packings and glands from piston rod.
8. Remove throat packings and glands from cylinder.
Discard throat packings and glands.
Assembling the Pump
1. A) For all non-QuikPak Repair Kits.
Soak all leather packings in SAE 30W oil for 1 hour
minimum prior to assembly. Stack male gland (204)
on piston rod. Alternately stack UHMWPE (208) and
leather (218) packings (note orientation) on piston
rod. Install female gland (217). Install piston wiper
NOTICE
To reduce the risk of damaging sealing surfaces, never use
sharp or pointed tools to remove sleeve. If the sleeve cannot
be removed easily, return the sleeve and cylinder to a Graco
distributor for removal.
NOTICE
To avoid damage to pump and sprayer, do not clean or wipe the
piston threads. Cleaning the piston threads could destroy the
special sealing patch and cause the piston to come loose
during operation. Use thread sealant if unsure about the
effectiveness of the thread patch.
ti7576c
ti3940c
Not
used on
16X414,
17H823,
17H832
ti7573c
Not
used on
16X414,
17H832,
17H823
Содержание
- A6583a 1
- Displacement pump 1
- For professional use only 1
- Important safety instructions 1
- Repair 1
- Table of contents 2
- Warning 3
- Warnings 3
- Cleaning and inspecting parts 4
- Pressure relief procedure 4
- Pump repair kits 4
- Service 4
- Tools needed 4
- Disassembling the pump 5
- Note sleeve may come out of cylinder with piston rod 5
- Note spring 233 only used on 16x426 17h835 17h834 17h825 17h827 17h837 and 17h892 5
- Repair when pump is separated from sprayer 5
- Assembling the pump 6
- Not used on 16x414 17h823 17h832 6
- Not used on 16x414 17h832 17h823 6
- Not used on 16x414 17h823 17h832 7
- Not used on 16x414 17h823 17h832 8
- Note do not slide piston assembly into top of sleeve as this may damage piston packing 8
- Note spring 233 only used on 16x426 17h835 17h834 17h827 17h837 17h892 9
- Cross section reference 11
- V max uhwmpe blue 11
- Parts pump 16x414 12
- Parts pump 17h823 17h832 13
- Parts pump 17h826 17h836 14
- Parts pump 16x419 15
- 3a6583a 16
- Parts pump 17h833 17h834 17h892 16
- Parts pump 17h824 17
- 3a6583a 18
- Parts pump 17h827 17h835 17h837 18
- Ref part description qty 18
- These parts are also included in repair kit 17h844 ceramic balls which may be purchased separately these parts are also included in repair kit 17h852 ceramic balls which may be purchased separately 18
- Parts pump 17h825 19
- 3a6583a 20
- California proposition 65 20
- Graco standard warranty 20
- H835 17h837 1 2 npt f 1 2 npt f 20
- Maximum working pressure 3300 psi 227 bar 22 mpa fluid inlet size 1 5 16 12 un m 1 5 16 12 un m fluid outlet size 16x414 17h832 16x419 17h826 17h833 17h827 17h834 16x426 17h836 17h823 17h824 17h825 3 8 npt f 3 8 npt f 20
- Technical data 20
- U s metric 20
- Warning this product can expose you to chemicals known to the state of california to cause cancer and birth defects or other reproductive harm for more information go to www p65warnings ca gov 20
- Wetted parts stainless steel ptfe leather nylon nickel and zinc plated carbon steel tungsten carbide chrome plating fluoroelastomer acetal polyethylene ceramic 20
- Graco information 21
Похожие устройства
- Graco Ultra Max II 695 17E634 Инструкция по эксплуатации
- Graco Ultra Max II 695 17E634 Брошюра
- Graco Ultra Max II 695 17E634 Сертификат
- Graco Ultra Max II 695 17E634 Техническая документация
- Graco Ultra Max II 695 17E635 Инструкция по эксплуатации
- Graco Ultra Max II 695 17E635 Брошюра
- Graco Ultra Max II 695 17E635 Сертификат
- Graco Ultra Max II 695 17E635 Техническая документация
- Graco Ultra Max II 695 17E636 Инструкция по эксплуатации
- Graco Ultra Max II 695 17E636 Брошюра
- Graco Ultra Max II 695 17E636 Сертификат
- Graco Ultra Max II 695 17E636 Техническая документация
- Graco Ultra Max II 795 17E639 Инструкция по эксплуатации
- Graco Ultra Max II 795 17E639 Брошюра
- Graco Ultra Max II 795 17E639 Сертификат
- Graco Ultra Max II 795 17E639 Техническая документация
- Graco Ultra Max II 695 17E639 Инструкция по эксплуатации
- Graco Ultra Max II 695 17E639 Брошюра
- Graco Ultra Max II 695 17E639 Сертификат
- Graco Ultra Max II 695 17E639 Техническая документация