![Graco Reactor 3 E-20 ESR311 [3/36] Warning](/img/pdf.png)
Graco Reactor 3 E-20 ESR311 [3/36] Warning
![Graco Reactor 3 E-20 26R312 [3/36] Warning](/views2/1900372/page3/bg3.png)
Warnings
309577Y 3
Warnings
The following warnings are for the setup, use, grounding, maintenance, and repair of this equipment. The
exclamation point symbol alerts you to a general warning and the hazard symbols refer to procedure-specific risks.
When these symbols appear in the body of this manual or on warning labels, refer back to these Warnings.
Product-specific hazard symbols and warnings not covered in this section may appear throughout the body of this
manual where applicable.
WARNING
SKIN INJECTION HAZARD
High-pressure fluid from dispensing device, hose leaks, or ruptured components will pierce skin.
This
may look like just a cut, but it is a serious injury that can result in amputation. Get immediate surgical
treatment.
• Engage trigger lock when not dispensing.
• Do not point dispensing device at anyone or at any part of the body.
• Do not put your hand over the fluid outlet.
• Do not stop or deflect leaks with your hand, body, glove, or rag.
• Follow the Pressure Relief Procedure when you stop dispensing and before cleaning, checking,
or servicing equipment.
• Tighten all fluid connections before operating the equipment.
• Check hoses and couplings daily. Replace worn or damaged parts immediately.
FIRE AND EXPLOSION HAZARD
Flammable fumes, such as solvent and paint fumes, in work area can ignite or explode. Paint or
solvent flowing through the equipment can cause static sparking. To help prevent fire and explosion:
• Use equipment only in well ventilated area.
• Eliminate all ignition sources; such as pilot lights, cigarettes, portable electric lamps, and plastic
drop cloths (potential static sparking).
• Ground all equipment in the work area. See Grounding instructions in related manuals.
• Never spray or flush solvent at high pressure.
• Keep work area free of debris, including solvent, rags and gasoline.
• Do not plug or unplug power cords, or turn power or light switches on or off when flammable
fumes are present.
• Use only grounded hoses.
• Hold gun firmly to side of grounded pail when triggering into pail. Do not use pail liners unless they
are anti-static or conductive.
• Stop operation immediately if static sparking occurs or you feel a shock. Do not use equipment
until you identify and correct the problem.
• Keep a working fire extinguisher in the work area.
Содержание
- Air and electric proportioners for professional use only 1
- Displacement pump 1
- For use with reacto 1
- Important safety instructions 1
- Instructions 1
- Contents 2
- Model numbers 2
- Related manuals 2
- Warning 3
- Warnings 3
- Warning 4
- Warning 5
- Important isocyanate iso information 6
- Isocyanate conditions 6
- Changing materials 7
- Foam resins with 245 fa blowing agents 7
- Keep components a and b separate 7
- Moisture sensitivity of isocyanates 7
- Pressure relief procedure 8
- Repair 8
- Clean and inspect parts 9
- Fill the wet cups 9
- Repair kits 9
- Tools needed 9
- Component a iso pump 10
- Cutaway views 10
- 245972 18d010 11
- 262648 24y174 11
- Component b resin pump 11
- Disassemble the pump 12
- Reassemble the pump 15
- Component a iso pumps with wet cup flush feature 20
- Component b resin pumps 28
- Note these pumps were also used on component a iso side of reactors built before may 2003 28
- Part 245970 e 20 and e xp1 includes items 1 7 9 23 part 245971 e xp2 includes items 1 7 9 22 part 262648 a 25 includes items 1 7 9 22 part 245972 e 30 includes items 1 22 shown part 24y174 a xp1 includes items 1 7 9 22 part 18d010 reactor 3 e 20 includes items 1 17 19 22 28
- Parts included in pump repair kits purchase separately some parts in the kit may not be used in your pump order the correct kit for your pump from the table below 30
- Pump part repair kit 245970 246420 245971 262648 246421 245972 246422 24y174 17k352 18d010 18e196 30
- Wet cup conversion kits may be purchased separately to convert pumps 245970 245971 262648 and 245972 see page 33 for further information 30
- Accessories 33
- Iso pump oil 33
- Reservoir kit 33
- Throat seal liquid 33
- Wet cup conversion kits 33
- Displacement pump 34
- Technical specifications 34
- California proposition 65 35
- California residents 35
- Warning cancer and reproductive harm www p65warnings ca gov 35
- For the latest information about graco products visit www graco com for patent information see www graco com patents 36
- Graco headquarters minneapolis international offices belgium china japan korea 36
- Graco inc and subsidiaries p o box 1441 minneapolis mn 55440 1441 usa copyright 2003 graco inc all graco manufacturing locations are registered to iso 9001 www graco com revision 36
- Graco information 36
- Graco standard warranty 36
- March 2022 36
- To place an order contact your graco distributor or call to identify the nearest distributor phone 612 623 6921 or toll free 1 800 328 0211 fax 612 378 3505 36
Похожие устройства
- Graco Reactor 3 E-20 ESR312 Инструкция по эксплуатации
- Graco Reactor 3 E-20 ESR312 Брошюра
- Graco Reactor 3 E-20 ESR312 Сертификат
- Graco Reactor 3 E-20 ESR312 Техническая документация
- Graco Reactor 3 E-20 ESR313 Инструкция по эксплуатации
- Graco Reactor 3 E-20 ESR313 Брошюра
- Graco Reactor 3 E-20 ESR313 Сертификат
- Graco Reactor 3 E-20 ESR313 Техническая документация
- Graco Reactor 3 E-20 IHR310 Инструкция по эксплуатации
- Graco Reactor 3 E-20 IHR310 Брошюра
- Graco Reactor 3 E-20 IHR310 Сертификат
- Graco Reactor 3 E-20 IHR310 Техническая документация
- Graco Reactor 3 E-20 IHR311 Инструкция по эксплуатации
- Graco Reactor 3 E-20 IHR311 Брошюра
- Graco Reactor 3 E-20 IHR311 Сертификат
- Graco Reactor 3 E-20 IHR311 Техническая документация
- Graco Reactor 3 E-20 IHR312 Инструкция по эксплуатации
- Graco Reactor 3 E-20 IHR312 Брошюра
- Graco Reactor 3 E-20 IHR312 Сертификат
- Graco Reactor 3 E-20 IHR312 Техническая документация