![Graco REACTOR 3 E-30 IHR331 [16/26] Hose control modes](/img/pdf.png)
Graco REACTOR 3 E-30 IHR331 [16/26] Hose control modes
![Graco REACTOR 3 E-30 26R330 [16/26] Hose control modes](/views2/1900731/page16/bg10.png)
Operation
16 3A7683G
Hose Control Modes
The target temperature of component materials can be
controlled using one of three hose control modes. Set
your preferred hose control mode using the Advanced
Display Module on the Reactor system. See your
proportioner manual to set the hose control mode. See
Related Manuals, page 2.
Pressure Relief Procedure
Before disconnecting or repairing hoses, relieve all fluid
pressure and shut off electrical power to proportioner.
Follow the Pressure Relief Procedure in your Reactor
Proportioning System manual. See Related Manuals,
on page 2.
Hose
Control
Mode
Description
FTS Mode The fluid temperature sensor (FTS)
installed in the hose automatically controls
the hose fluid temperature. This mode
requires the FTS to be installed and
working properly. See your FTS kit manual,
Related Manuals, on page 2.
Resistance
Mode
The hose heater element resistance
automatically controls hose fluid
temperature. This mode does not use an
FTS. This mode requires a calibration
factor (see your proportioner manual).
Manual
Control
Mode
Control to target current (amps) to heat the
hose. Manual control mode has no
pre-programmed control and is designed
to be used for a limited amount of time
until a proper calibration can be performed
or FTS issues can be resolved.
This equipment stays pressurized until pressure is
manually relieved. To help prevent serious injury from
pressurized fluid, such as skin injection and
splashing fluid, follow the Pressure Relief Procedure
when you stop spraying and before cleaning,
checking, or servicing the equipment.
Содержание
- A7683g 1
- For use with reactor 3 proportioners for professional use only not approved for use in explosive atmospheres or hazardous classified locations 1
- Heated hose 1
- Important safety instructions 1
- Instructions 1
- Reacto 1
- Contents 2
- Overview 2
- Related manuals 2
- A hose 3
- B hose 3
- Fluid temperature sensor kits 3
- Hose bundle part numbers 3
- Reactor 3 main hoses 3
- Whip hoses 3
- Warning 4
- Warnings 4
- Warning 5
- Warning 6
- Important isocyanate iso information 7
- Isocyanate conditions 7
- Changing materials 8
- Foam resins with 245 fa blowing agents 8
- Keep components a and b separate 8
- Material self ignition 8
- Moisture sensitivity of isocyanates 8
- Component identification 9
- Ref description a gun b whip hose c joint protector d main hose bundle g reactor 9
- Externally heated main hose 10
- Grounding 10
- Installation 10
- Internally heated main hose 10
- Whip hose 10
- Connect hoses to proportioner 11
- Connecting hose bundle sections 12
- Check hoses for leaks 13
- Connect whip hose to gun or gun manifold 13
- Hoses with hook and loop scuff jackets 14
- Protective covering 14
- Operation 15
- Hose control modes 16
- Pressure relief procedure 16
- End of product life 17
- Externally heated hoses 17
- Internally heated hoses 17
- Maintenance 17
- Preventative maintenance 17
- Recycling and disposal 17
- Replacing individual a or b hose 17
- Internally heated hose 25p437 18
- Note the hose model is shown with the optional sensor cable but is representative of all internally heated hoses 18
- Internally heated hose parts list 19
- Externally heated hose 20
- Warning 20
- Externally heated hose parts list 21
- Fts kit 18e175 22
- Scuff wrap kit 18e178 22
- See gun manual 22
- Whip hose 25p775 22
- Whip hose parts list 23
- Accessories 24
- California proposition 65 25
- California residents 25
- Reactor 3 heated hose 25
- Technical specifications 25
- Warning cancer and reproductive harm www p65warnings ca gov 25
- For the latest information about graco products visit www graco com for patent information see www graco com patents 26
- Graco headquarters minneapolis international offices belgium china japan korea 26
- Graco inc and subsidiaries p o box 1441 minneapolis mn 55440 1441 usa copyright 2020 graco inc all graco manufacturing locations are registered to iso 9001 26
- Graco information 26
- Graco standard warranty 26
- To place an order contact your graco distributor or call to identify the nearest distributor phone 612 623 6921 or toll free 1 800 328 0211 fax 612 378 3505 26
- Www graco com revision 26
Похожие устройства
- Graco REACTOR 3 E-30 IHR332 Инструкция по эксплуатации
- Graco REACTOR 3 E-30 IHR332 Брошюра
- Graco REACTOR 3 E-30 IHR332 Сертификат
- Graco REACTOR 3 E-30 IHR332 Техническая документация
- Graco REACTOR 3 E-30 IHR333 Инструкция по эксплуатации
- Graco REACTOR 3 E-30 IHR333 Брошюра
- Graco REACTOR 3 E-30 IHR333 Сертификат
- Graco REACTOR 3 E-30 IHR333 Техническая документация
- Graco REACTOR 3 E-30 ISR330 Инструкция по эксплуатации
- Graco REACTOR 3 E-30 ISR330 Брошюра
- Graco REACTOR 3 E-30 ISR330 Сертификат
- Graco REACTOR 3 E-30 ISR330 Техническая документация
- Graco REACTOR 3 E-30 ISR331 Инструкция по эксплуатации
- Graco REACTOR 3 E-30 ISR331 Брошюра
- Graco REACTOR 3 E-30 ISR331 Сертификат
- Graco REACTOR 3 E-30 ISR331 Техническая документация
- Graco REACTOR 3 E-30 ISR332 Инструкция по эксплуатации
- Graco REACTOR 3 E-30 ISR332 Брошюра
- Graco REACTOR 3 E-30 ISR332 Сертификат
- Graco REACTOR 3 E-30 ISR332 Техническая документация