Scarlett SC-VC80H22 [6/36] Cleaner

Scarlett SC-VC80H22 [6/36] Cleaner
IM022
www.scarlett.ru SC-VC80H22
6
CAUTION: To avoid voltage overload do not plug the unit and other
powerful electrical appliances to the power supply at the same time.
Never use the vacuum cleaner without filters.
Do not use the appliance on wet surfaces. This unit does not absorb
water.
If you have cleaned the carpet with liquid detergent, let the carpet dry up
completely before vacuuming it.
Never use the appliance without dust bin. Replace the dust bin without
delay if it is damaged.
Do not attempt to repair, adjust or replace parts in the appliance. Repair the malfunctioning
appliance in the nearest service center.
If the product has been exposed to temperatures below 0ºC for some time it should be kept at
room temperature for at least 2 hours before turning it on.
The manufacturer reserves the right to introduce minor changes into the product design without
prior notice, unless such changes influence significantly the product safety, performance, and
functions.
Manufacturing date is indicated on the unit and/or on packing as well as in accompanying
documents in the following format XX.XXXX where first two figures XX is the month of production,
and following four figures XXXX is the year of production.
VACCUUM CLEANER ASSEMBLY
The device can be used for removing dust from furniture, cars, crevices, curtains, decorative
surfaces and rooms.
Unpack the device.
Take the metal stick and insert and connect the metal stick into the opeing.
Insert and connect the floor nozzle at the lower opening of the main body of the hand vacuum
cleaner.
OPERATION
Connect the plug of the device to the wall power socket.
Press ON/OFF switch to activate the vacuum cleaner. To disactivate it press ON/OFF switch
once again.
Use vacuum cleaner without metal stick for cleaning of easy-available surfaces, car, furniture .
To disassemble metal stick from the body of vacuum cleaner, open the clip and pull the stick
upward.
The model includes crevice nozzle for removing dust from hard-to-reach places. Remove brush
and push crevice nozzle release button for disassemble it.
WARNING!
Be sure to clean the container after each cleaning.
Never use the vacuum cleaner without installed filter and with damaged or dirty filter. Otherwise,
dust will fall into the motor and cause damage to the vacuum cleaner.
Don’t use the vacuum cleaner if the container is filled to the mark “MAX”. When the container is
filled, dirty air clogs up the vacuum cleaner filter and the engine can overheat and disable.
Don’t use the vacuum cleaner for cleaning of material debris such as cement, whitewash, plaster,
metal shavings and etc. These particles cause to the engine damage.
Don’t wash vacuum cleaner parts in a dishwasher or a construction machine.
CLEANING AND MAINTENANCE
Switch off your vacuum cleaner and disconnect the plug of the device from wall socket.
Remove floor brush from the body of the vacuum cleaner by pulling it downward.

Содержание

Скачать