Home
Главная
Hotpoint-Ariston
Hotpoint-Ariston
IO 632 CCRFH
Инструкция по эксплуатации Страница: 11

Hotpoint-Ariston IO 632 CCRFH [11/20] Care and maintenance

Care and maintenance

Switching the appliance off

Disconnect your appliance from the electricity supply

before carrying out any work on it.

Cleaning the appliance

Do not use abrasive or corrosive detergents (for

example, products in spray cans for cleaning barbecues

and ovens), stain removers, anti-rust products, powder

detergents or sponges with abrasive surfaces: these

may scratch the surface beyond repair.

Never use steam cleaners or pressure cleaners on the

appliance.

• It is usually sufﬁ cient simply to wash the hob using a

damp sponge and dry it with absorbent kitchen towel.

• If the hob is particularly dirty, rub it with a special

glass ceramic cleaning product, then rinse well and

dry thoroughly.

• To remove more stubborn dirt, use a suitable scraper.

Remove spills as soon as possible, without waiting

for the appliance to cool, to avoid residues forming

crusty deposits. You can achieve excellent results

by using a rust-proof steel wire sponge - speciﬁ cally

designed for glass ceramic surfaces - soaked in

soapy water.

• If any plastic or sugary substances are accidentally

melted on the hob, remove them immediately with

the scraper, while the surface is still hot.

• Once it is clean, the hob may be treated with a

special protective maintenance product: the invisible

ﬁ lm left by this product protects the surface from

drips during cooking. This maintenance task should

be carried out while the appliance is warm (not hot)

or cold.

• Always remember to rinse the appliance well with

clean water and dry it thoroughly: residues can

become encrusted during subsequent cooking

processes.

Stainless steel frame (only in models with outer frame)

Stainless steel can be marked by hard water which has

been left on the surface for a long time, or by cleaning

products containing phosphorus.

After cleaning, it is advisable to rinse the surface well

and dry it thoroughly. If water is spilt on the surface, dry

it quickly and thoroughly.

Some hobs have an aluminium frame which is

similar to stainless steel. Do not use any cleaning or

degreasing products which are not suitable for use with

aluminium.

Disassembling the hob

If it is necessary to disassemble the hob:

1. Loosen the screws ﬁ xing the alignment springs on

each side.

2. Loosen the screws holding the ﬁ xing hooks in each

corner.

3. Take the hob out of its installation cavity.

Do not attempt to repair the appliance yourself. If the

appliance breaks down, contact a Service Centre.

Technical description of the models

The induction system is the quickest existing way

of cooking. Unlike traditional hotplates where the

cooking zone heats up, with the induction system

heat is generated directly inside pans which have

ferromagnetic bases.

Key:

I = single induction cooking zone

B = booster: the power level of the cooking zone may

be boosted to 3000 W

* = the maximum power level is limited while the

booster is activated for the relevant rear cooking

zone (see Start-up and use).

Hobs

Cooking zone Power (W)

Back Left

I 1400

Back Right

I 2200 – B 3000* - 1600 if Front Right*

Front Left

I 1400

Front Right

I 1400 – B 2000* – 600 if Back Right*

Total power

6400

IO 632 CC RFH

Stainless steel frame (only in models with outer frame)

Hotpoint-Ariston IO 632 CCRFH [11/20] Care and maintenance

Содержание

Похожие устройства