Shimadzu UX-6200H [35/129] Span calibration

19

4. Installation

For Basic Operation

4.5 Span Calibration

It is necessary to calibrate the balance after it is moved.

Verify that the balance is stable before performing the span calibration. To achieve a very stable state,

ensure that the balance has been turned on with the gram-display for at least one hour, that the tem-

perature is constant, that there are no breezes or vibrations and that the balance is in an area isolated

from the normal traffic flow.

pletion of span calibration, the gram-display will

appear.

This is the standard calibration type. Refer to 10.3.1 for use of external weights.

Note

Span calibration must be performed once the balance is installed and

before using the balance as a legal measuring instrument in the EU. Span

calibration must be performed with the internal calibration weight to main-

tain the verification valid. The balance must be connected to power and