Gigabyte Z690I AORUS ULTRA PLUS [21/28] Sata configuration

- 21 -

& Media detect count

Allows you to set the number of times to check the presence of media. This item is congurable only when

Network Stack is enabled.

 NVMe Conguration

Displays information on your M.2 NVME PCIe SSD if installed.

 SATA Conguration

& SATA Controller(s)

Enables or disables the integrated SATA controllers.

& Aggressive LPM Support

Enables or disables the power saving feature, ALPM (Aggressive Link Power Management), for the chipset

SATA controllers.

& Port

Enables or disables each SATA port.

& SATA Port DevSlp

Allows you to determine whether to let the connected SATA device go into sleep mode.

& Hot plug

Enables or disable the hot plug capability for each SATA port.

& Congured as eSATA

Enables or disables support for external SATA devices.

 VMD setup menu

(Note)

Allows you to congure the VMD controllers. To create RAID congurations, set Enable VMD controller to

Enabled and set Enable VMD Global Mapping to Disabled. Then depending on the SATA/M.2 connector

you use, set the corresponding Map this Root Port under VMD item to Enabled. Please navigate to the

"Conguring a RAID Set" page of GIGABYTE's website for instructions on conguring a RAID array.

(Note) This item is available only when the motherboard chipset supports this feature.