![Gigabyte B660 DS3H DDR4 [18/42] 6 back panel connectors](/img/pdf.png)
Gigabyte B660 DS3H DDR4 [18/42] 6 back panel connectors
![Gigabyte B660 DS3H DDR4 [18/42] 6 back panel connectors](/views2/1919643/page18/bg12.png)
- 18 -
2-6 Back Panel Connectors
USB 2.0/1.1 Port (Q-Flash Plus Port)
The USB port supports the USB 2.0/1.1 specication. Use this port for USB devices. Before using Q-Flash
Plus
(Note)
, make sure to insert the USB ash drive into this port rst.
USB 2.0/1.1 Port
The USB port supports the USB 2.0/1.1 specication. Use this port for USB devices.
PS/2 Keyboard/Mouse Port
Use this port to connect a PS/2 mouse or keyboard.
SMA Antenna Connectors (1T1R)jk (2T2R)l
Use this connector to connect an antenna.
HDMI Port
The HDMI port is HDCP 2.3 compliant and supports Dolby TrueHD and DTS
HD Master Audio formats. It also supports up to 192KHz/24bit 7.1-channel
LPCM audio output. You can use this port to connect your HDMI-supported monitor. The maximum
supported resolution is 4096x2160@60 Hz, but the actual resolutions supported are dependent on the
monitor being used.
DisplayPort
DisplayPort delivers high quality digital imaging and audio, supporting bi-directional audio transmission.
DisplayPort can support HDCP 2.3 content protection mechanisms. You can use this port to connect your
DisplayPort-supported monitor. Note: The DisplayPort Technology can support a maximum resolution of
4096x2304@60 Hz but the actual resolutions supported depend on the monitor being used.
Tighten the antennas to the antenna connectors and then aim the antennas correctly for better
signal reception.
After installing the HDMI/DisplayPort device, make sure to set the default sound playback device
to HDMI/DisplayPort. (The item name may differ depending on your operating system.)
• When removing the cable connected to a back panel connector, rst remove the cable from your
device and then remove it from the motherboard.
• When removing the cable, pull it straight out from the connector. Do not rock it side to side to
prevent an electrical short inside the cable connector.
(Note) To enable the Q-Flash Plus function, please navigate to the "Unique Features" page of GIGABYTE's
website for more information.
jkl
j Only for B660 DS3H AC.
k Only for B660 DS3H AC DDR4.
l Only for B660 DS3H AX DDR4.
Содержание
- B660 ds3h ac b660 ds3h ac ddr4 b660 ds3h ax ddr4 b660 ds3h ddr4 1
- For more product details please visit gigabyte s website 1
- Gigabyte will reduce paper use in order to fulfill the responsibilities of a global citizen also to reduce the impacts on global warming the packaging materials of this product are recyclable and reusable gigabyte works with you to protect the environment 1
- Rev 1101 1
- User s manual 1
- Copyright 2
- Disclaimer 2
- Identifying your motherboard revision 2
- Chapter 1 product introduction 3
- Chapter 2 hardware installation 3
- Chapter 3 bios setup 4 3
- Chapter 4 installing the operating system and drivers 6 3
- Chapter 5 appendix 8 3
- Table of contents 3
- 1 motherboard layout 4
- B660 ds3h ac 4
- Chapter 1 product introduction 4
- B660 ds3h ac ddr4 b660 ds3h ax ddr4 5
- B660 ds3h ddr4 6
- 2 box contents 7
- 1 installation precautions 8
- Chapter 2 hardware installation 8
- 2 product specifications 9
- 2 productspecifications 9
- 3 installing the cpu and cpu cooler 13
- A note the cpu orientation 13
- B installing the cpu 14
- Do not force to engage the cpu socket locking lever when the cpu is not installed correctly as this would damage the cpu and cpu socket 14
- Follow the steps below to correctly install the cpu into the motherboard cpu socket 14
- Be sure to install the cpu cooler after installing the cpu actual installation process may differ depending the cpu cooler to be used refer to the user s manual for your cpu cooler 15
- C installing the cpu cooler 15
- 4 installing the memory 16
- Dualchannelmemoryconfiguration 16
- 5 installing an expansion card 17
- 6 back panel connectors 18
- Displayport 18
- Hdmi port 18
- Ps 2 keyboard mouse port 18
- Sma antenna connectors 1t1r jk 2t2r l 18
- Usb 2 1 port 18
- Usb 2 1 port q flash plus port 18
- Audio jack configurations 19
- Line in rear speaker out blue 19
- Line out front speaker out green 19
- Mic in center subwoofer speaker out pink 19
- Please visit gigabyte s website for details on configuring the audio software 19
- Port with usb 3 gen 2x2 support 19
- Rj 45 lan port 19
- The gigabit ethernet lan port provides internet connection at up to 1 gbps data rate the following describes the states of the lan port leds 19
- The line in jack use this audio jack for line in devices such as an optical drive walkman etc 19
- The line out jack 19
- The mic in jack 19
- The reversible usb port supports the usb 3 gen 2x2 specification and is compatible to the usb 3 gen 2 usb 3 gen 1 and usb 2 specifications use this port for usb devices 19
- The usb 3 gen 2 port supports the usb 3 gen 2 specification and is compatible to the usb 3 gen 1 and usb 2 specification use this port for usb devices 19
- Usb 3 gen 2 type a port red 19
- Usb type 19
- You can change the functionality of an audio jack using the audio software to configure 7 channel audio access the audio software for audio settings 19
- 7 internal connectors 20
- 2 atx_12v_2x4 atx 2x4 12v power connector and 2x12 main power connector 21
- The 12v power connector mainly supplies power to the cpu if the 12v power connector is not connected the 12v power connector mainly supplies power to the cpu if the 12v power connector is not connected the computer will not start 21
- To meet expansion requirements it is recommended that a power supply that can withstand high power consumption be used 500w or greater if a power supply is used that does not provide the required power the result can lead to an unstable or unbootable system 21
- With the use of the power connector the power supply can supply enough stable power to all the components on the motherboard before connecting the power connector first make sure the power supply is turned off and all devices are properly installed the power connector possesses a foolproof design connect the power supply cable to the power connector in the correct orientation 21
- 4 cpu_fan sys_fan1 2a 2b fan headers 22
- All fan headers on this motherboard are 4 pin most fan headers possess a foolproof insertion design when connecting a fan cable be sure to connect it in the correct orientation the black connector wire is the ground wire the speed control function requires the use of a fan with fan speed control design for optimum heat dissipation it is recommended that a system fan be installed inside the chassis 22
- Be sure to connect fan cables to the fan headers to prevent your cpu and system from 22
- Overheating overheating may result in damage to the cpu or the system may hang 22
- Sys_fan3_pump system fan water cooling pump header 22
- The fan pump header is 4 pin and possesses a foolproof insertion design most fan headers possess a foolproof insertion design when connecting a fan cable be sure to connect it in the correct orientation the black connector wire is the ground wire the speed control function requires the use of a fan with fan speed control design for optimum heat dissipation it is recommended that a system fan be installed inside the chassis the header also provides speed control for a water cooling pump please navigate to the bios setup page of gigabyte s website and search for smart fan 6 for more information 22
- These fan headers are not configuration jumper blocks do not place a jumper cap on the headers 22
- Connect your addressable led strip to the header the power pin marked with a triangle on the plug of the led strip must be connected to pin 1 of the addressable led strip header incorrect connection may lead to the damage of the led strip 23
- Connector cpu_fan sys_fan1 2a 2b sys_fan3_pump cpu_opt 23
- Cpu_opt water cooling cpu fan header 23
- D_led1 d_led2 addressable led strip headers 23
- Maximum current 2a 2a 2a 2a 23
- Maximum power 24w 24w 24w 24w 23
- No pin 23
- Pin no definition 23
- Pwm speed control 23
- The fan header is 4 pin and possesses a foolproof insertion design most fan headers possess a foolproof insertion design when connecting a fan cable be sure to connect it in the correct orientation the black connector wire is the ground wire the speed control function requires the use of a fan with fan speed control design 23
- The headers can be used to connect a standard 5050 addressable led strip with maximum power rating of 5a 5v and maximum number of 1000 leds 23
- Voltage speed control 23
- Before installing the devices be sure to turn off the devices and your computer unplug the power cord from the power outlet to prevent damage to the devices 24
- Chipset supports raid 0 raid 1 raid 5 and raid 10 please navigate to the configuring a raid set page of gigabyte s website for instructions on configuring a raid array 24
- Connect your rgb led strip to the header the power pin marked with a triangle on the plug of the led strip must be connected to pin 1 12v of this header incorrect connection may lead to the damage of the led strip 24
- For how to turn on off the lights of the led strip please navigate to the unique features page of gigabyte s website 24
- Led_c1 led_c2 rgb led strip headers 24
- Sata3 4 5 6 7 sata 6gb s connectors 24
- The headers can be used to connect a standard 5050 rgb led strip 12v g r b with maximum power rating of 2a 12v and maximum length of 2m 24
- The sata connectors conform to sata 6gb s standard and are compatible with sata 3gb s and sata 1 gb s standard each sata connector supports a single sata device the inte 24
- To enable hot plugging for the sata ports please navigate to the bios setup page of gigabyte s website and search for sata configuration for more information 24
- Follow the steps below to correctly install an m ssd in the m connector step 1 locate the proper mounting hole based on the length of your m ssd drive if needed move the standoff to the desired mounting hole insert the m ssd into the m connector at an angle step 2 press the m ssd down and then use the included screw to secure it in the connector 25
- M pcie x4 ssd m pcie x2 ssd m sata ssd 25
- M2a_cpu a a 25
- M2a_cpu m2p_sb m socket 3 connectors 25
- M2p_sb a a 25
- The m connectors on the motherboard support only m pcie ssds 25
- Types of m ssds supported by each m connector 25
- F_panel front panel header 26
- 5vdual 27
- F_audio front panel audio header 27
- Head phone detection 27
- Head phone l 27
- Head phone r 27
- Mic detection 27
- No pin 27
- Pin no definition 27
- Sense_send 27
- Some chassis provide a front panel audio module that has separated connectors on each wire instead of a single plug for information about connecting the front panel audio module that has different wire assignments please contact the chassis manufacturer 27
- Spdif_o s pdif out header 27
- Spdifo 27
- The front panel audio header supports high definition audio hd you may connect your chassis front panel audio module to this header make sure the wire assignments of the module connector match the pin assignments of the motherboard header incorrect connection between the module connector and the motherboard header will make the device unable to work or even damage it 27
- This header supports s pdif digital output which allows you to connect a s pdif digital audio cable to output digital audio from your motherboard to the supported audio devices for information about connecting the digital audio cable carefully read the manual for your audio devices 27
- Cc1 18 d 28
- D1 18 ssrx2 28
- D1 19 vbus 28
- F_u32 usb 3 gen 1 header 28
- F_u32c usb type 28
- Gnd 14 gnd 28
- Gnd 14 sstx2 28
- Gnd 17 ssrx2 28
- Header with usb 3 gen 1 support 28
- Nc 20 no pin 28
- Pin no definition pin no definition 28
- Rx1 15 rx2 28
- Rx1 16 rx2 28
- Sbu1 19 d 28
- Sbu2 20 cc2 28
- Ssrx1 12 d2 28
- Ssrx1 13 gnd 28
- Sstx1 15 sstx2 28
- Sstx1 16 gnd 28
- The header conforms to usb 3 gen 1 and usb 2 specification and can provide two usb ports for purchasing the optional 3 front panel that provides two usb 3 gen 1 ports please contact the local dealer 28
- The header conforms to usb 3 gen 1 specification and can provide one usb port 28
- Tx1 12 tx2 28
- Tx1 13 tx2 28
- Vbus 11 d2 28
- Vbus 11 vbus 28
- Vbus 17 gnd 28
- Chip select 29
- Data input 29
- Data output 29
- Do not plug the ieee 1394 bracket 2x5 pin cable into the usb 2 1 header prior to installing the usb bracket be sure to turn off your computer and unplug the power cord 29
- F_usb1 f_usb2 usb 2 1 headers 29
- From the power outlet to prevent damage to the usb bracket 29
- K only for b660 ds3h ac ddr4 l only for b660 ds3h ax ddr4 m only for b660 ds3h ddr4 29
- No pin 29
- Pin no definition 29
- Power 3 v 29
- Power 5v 29
- Spi_tpm trusted platform module header klm 29
- The headers conform to usb 2 1 specification each usb header can provide two usb ports via an optional usb bracket for purchasing the optional usb bracket please contact the local dealer 29
- Usb dx 29
- Usb dy 29
- You may connect an spi tpm trusted platform module to this header 29
- Add in card 30
- Add in card connectors 30
- Com serial port header 30
- No pin 30
- Pin no definition 30
- Supports a thunderbol 30
- Thb_c1 thb_c2 thunderbol 30
- The com header can provide one serial port via an optional com port cable for purchasing the optional com port cable please contact the local dealer 30
- The connectors are used to connect to a gigabyte thunderbol 30
- Clr_cmos clear cmos jumper 31
- Rst_sw rst reset button reset jumper 31
- Bat battery 32
- Qflash_plus q flash plus button 32
- Cpu cpu status led dram memory status led vga graphics card status led boot operating system status led 33
- Cpu dram vga boot status leds 33
- The status leds show whether the cpu memory graphics card and operating system are working properly after system power on if the cpu dram vga led is on that means the corresponding device is not working normally if the boot led is on that means you haven t entered the operating system yet 33
- Chapter 3 bios setup 34
- Function keys 35
- Startup screen 35
- 1 operating system installation 36
- Chapter 4 installing the operating system and drivers 36
- 2 drivers installation 37
- 1 configuring a raid set 38
- 1 configuringaraidset 38
- Before you begin please prepare the following items 38
- Chapter 5 appendix 38
- Raid levels 38
- Regulatory notices 39
- United states of america federal communications commission statement 39
- Wireless module approvals 41
- Contact us 42
- Gigabyte esupport 42
- To submit a technical or non technical sales marketing question please link to https esupport gigabyte com 42
Похожие устройства
- Gigabyte B660 DS3H AX DDR4 Руководство пользователя по BIOS
- Gigabyte B660 DS3H AX DDR4 Инструкция по эксплуатации
- Gigabyte B660 GAMING X Руководство пользователя по BIOS
- Gigabyte B660 GAMING X Инструкция по эксплуатации
- Gigabyte B660 GAMING X DDR4 Руководство пользователя по BIOS
- Gigabyte B660 GAMING X DDR4 Инструкция по эксплуатации
- Gigabyte B660 GAMING X AX DDR4 Руководство пользователя по BIOS
- Gigabyte B660 GAMING X AX DDR4 Инструкция по эксплуатации
- Gigabyte B660I AORUS PRO DDR4 Руководство пользователя по BIOS
- Gigabyte B660I AORUS PRO DDR4 Инструкция по эксплуатации
- Gigabyte B660M AORUS ELITE AX DDR4 Руководство пользователя по BIOS
- Gigabyte B660M AORUS ELITE AX DDR4 Инструкция по эксплуатации
- Gigabyte B660M AORUS ELITE DDR4 Руководство пользователя по BIOS
- Gigabyte B660M AORUS ELITE DDR4 Инструкция по эксплуатации
- Gigabyte B660M AORUS PRO Руководство пользователя по BIOS
- Gigabyte B660M AORUS PRO Инструкция по эксплуатации
- Gigabyte B660M AORUS PRO AX Руководство пользователя по BIOS
- Gigabyte B660M AORUS PRO AX Инструкция по эксплуатации
- Gigabyte B660M AORUS PRO DDR4 Руководство пользователя по BIOS
- Gigabyte B660M AORUS PRO DDR4 Инструкция по эксплуатации
Скачать
Случайные обсуждения