Vitek VT-1506 [6/6] Русский

7

9. Place one empty container under the percolation head and one under the steam nozzle.

10. Ensure that the Coffee switch is set to the position " " and Steam Control is set to the position "OFF".

11. Connect the appliance to a suitable mains supply outlet.

12. Turn the power switch on (position "|").

13. On Indicator glows indicating the appliance is switched on

14. Set the Coffee Switch to " "position.

15. Allow about half of the descaling solution to run through, then reset the Coffee switch to " "

22. Continue by allowing two tanks of clean water run through with the Coffee switch in " " position

23. Refill the water tank again.

24. Place one empty container under the percolation head and one under the steam nozzle.

25. Rotate the Steam Control to MAX about 30 second and then back to OFF position.

26. Turn the Coffee switch to " "position and allowing remainder of water to run through the percolation head.

27. Reset the Coffee switch to " ".

28. Switch off the machine and allow it to cool

29. Unscrew the valve spring and the gasket from the percolation head and replace percolation grid with the valve spring

and the gasket on the percolation head.

30. Finally replace the cappuccino accessory on the steam nozzle.

5. Remove the Cup Rest Grid and the drip tray from appliance and remove the spilt coffee and water then clean it.

(Fig. 11)

6. Remove the Cappuccino accessory by pulling downwards for cleaning. (Fig. 12)

Warning  Do not touch the steam nozzle when it is hot.

SPECIFICATIONS

Voltage/Frequency: 230 V ~ 50 Hz;

Power: 1060 W

SERVICE LIFE OF THE COFFEE MACHINE NOT LESS THAN 5 YEARS

6

ENGLISH

A. Съемный резервуар для воды

H. Крышка резервуара для воды

I. Плита подогрева

J. Регулятор подачи пара

K. Паровое сопло

L Вспенивающая насадка

M. Затвор фильтра

N. Фильтродержатель

O. Поддон для сбора утечек кофе

P. Ситечко фильтра на одну чашку

Q. Мерная ложка

РУССКИЙ