Monsher MHI 3002 [35/76] Trouble shooting

Monsher MHI 3002 [35/76] Trouble shooting
English 35
TROUBLE SHOOTING
Before calling the customer services,please check that the appliance is correctly
connected,any of the following cases are not covered by the guarantee
; Damage caused by improper use,storage or maintenance.
; Damage caused by unauthorised disassembly and repair.
; Damage caused by misuse.
; Using the ceramic hob for commercial purposes.
If an abnormality comes up,the ceramic hob will enter the protective state automatically and
display corresponding protective codes:
Ceramic Hob
Error
Code
Possible Cause What to do
ER03 Water or pot cover the user interface Clean the user interface
H
When in standby state "H" and "0"
repeatedly display, when off: always
display "H"
High temperature notice is the normal
notice.It will disappear automatically
when the temperature drops.
E The temperature inside too high
Please contact the supplier to reconnect
the thermocouple.
E7
The glass surface of the appliance is
too hot
Stop and cooling the appliance
Induction Hob
Error
Code
Possible Cause What to do
No pot or pot not suitable; Replace the pot;
ER03
Water or pot on the glass over the
control
Clean the user interface
F1E
The connection between the display
board and the left mainboard is fail (the
cooking zone which indicator showing
“E”)
1.Connection cable not correctly plugged
or defective;
2.Replace the Mainboard.
F3E
Coil temperature sensor failure. (the
cooking zone which indicator showing
“E”)
Replace the coil sensor

Содержание

Скачать