Yamaha NS-P9900 [4/24] Good no good

Yamaha NS-P9900 [4/24] Good no good
4 En
Connections
Before making connection, make sure that the
amplifier is switched off.
Connect the screw-type terminals at the rear of the
speakers to the speaker terminals on the amplifier with
a supplied speaker cable.
Connect the + terminals on the amplifier and on the
speakers using one side of the cable. Connect the
terminals on both components using the other side of
the cable.
Connect one speaker to the left (L) terminals of your
amplifier, and another speaker to the right (R) terminals,
making sure not to reverse the polarity (+, –). If one
speaker is connected with reversed polarity, the sound
will be unnatural and lack bass.
How to connect
1 Loosen the knob.
2 Twist the exposed wires of the cable together.
3 Insert the bare wire into the hole.
4 Tighten the knob and secure the cable.
Test the firmness of the connection by pulling the
cable lightly at the terminal.
Do not let the bare speaker wires touch each other as
this could damage the speaker and/or the amplifier.
Do not insert the insulation coating into the hole.
The sound may not be produced.
CONNECTIONS TO YOUR AMPLIFIER
Notes
Good
No Good
10 mm
CENTER REAR
(SURROUND)
R
L
+
NS-C9900
NS-E9900
Amplifier or
receiver
Loosen
Tighten
Black (–)
Red (+)
Bare wire
Insulation coating
Terminal
hole

Содержание

Скачать