Daikin FWG-AT [12/184] Operating range

1-10

Attach insulation sleeve

Round crimp-style terminal

Electric wire

Connect wires of the

same gauge to both side.

Do not connect wires of the

same gauge to one side.

Do not connect wires

of different gauges.

Step to connect the installation wire:

Used the correct screwdriver for tightening the terminal screws. If the block is too small, the mad of the screw might be

damaged and the screw will not be properly tightened. If tightening too hard, screw might be damaged.

•

Water temperature : 4°C ~ 10°C (Cooling), 35°C ~ 50°C (2 Pipes), 35°C ~ 70°C (4 Pipes),

Maximum water pressure : 16 bar

Air temperature : (as below)

Cooling Unit Heating Unit

The power supply cord must be equivalent to H07RN-F which is the minimum requirement.

When attaching the terminal box lid, make sure do not pinch any wires.

After all the wiring connections are done, fill in any gaps/holes with insulation (procured locally) to prevent small animals

and insects entering the unit from outside.

Use round crimp-style terminal for connecting wires to the power supply terminal block. Connect the wires by matching

to the indication on terminal block. (Refer to the wiring diagram attached on the unit).

•

•

•

•