Timberk AC TIM 48LC FS1 [8/32] Operating modes
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Timberk AC TIM 48LC FS1 [8/32] Operating modes

Timberk AC TIM 48LC FS1 [8/32] Operating modes
www.timberk.com • Electric air conditioner
8
AUTO mode – SMART (FEEL)
In auto mode, depending on the air temperature in the room, the conditioner
selects needed temperature parameters by itself in the following order:
7. OPERATING MODES
Temperature indoors Automatic mode sele ction Automatically maintained temperature
if <20° С then HEAT mode shall be turned on 23° С
if <20° С - 26° С then DRY mode shall be turned on 18° С
if <26° С
then COOL mode shall be turned on
23° С
In the Smart mode it is possible to change the threshold of mode transition.
When the Smart mode is on, the display indicates «-». Press the Temp
+/- buttons, and «-» will change to +1. ..+2 or -1 ...-2. Shift range of this
threshold is within -2...+2 ° from temperatures by default.
COOL, HEAT and FAN
1. Turn the conditioner on by pressing the ON/OFF button.
2. Press the MODE button to select COOL, HEAT or FAN mode manually.
3. Press the TEMP (up-down) buttons to set the desired air temperature in
the room (except for the FAN mode).
4. Press the FAN SPEED button on the remote control to select the fan
rotation speed: AUTO, LOW, MIDDLE, HIGH, and the conditioner will start
working in accordance with the selected setting.
5. To turn the conditioner off, press the ON/OFF button again. In FAN mode
air temperature in the room shall not be set.
DRY
Turn the conditioner on by pressing the ON/OFF button. Press the MODE
button to select the DRY mode. The conditioner will start working in the set
mode. To turn the conditioner off, press the ON/OFF button again.
SUPER (TURBO) operating mode
When you press the SUPER button on the remote control, the conditioner
starts working in heavy-duty mode for maximum cooling (in cooling mode)
or for maximum heating (in heating mode).
TIMER mode
The procedure for timer setup:
If the conditioner is off, then press the TIMER button to activate the
automatic turning on. Press this button again to set the turn-on time in
the set time interval. To cancel the timer mode, press the TIMER button
once more
SLEEP (Night Care) button.
Button «SLEEP» (Night Care). Using this button, you may turn the sleep
mode on and off. In this mode, if working for cooling, the conditioner will
increase temperature by 1 °С from the specified one within two hours.
If working for heating, the conditioner will decrease temperature by 1 °С
from the specified one within two hours. After 10 hours of operation the
conditioner will turn off automatically.
Remote control.
Work with remote control.
Installation and replacement of batteries: install two LR03 alkaline batteries,
according to the polarity shown on the remote control.
In order to avoid malfunction of the remote control, do not insert used or
various-type batteries in it.
If the conditioner is not used for a long time, remove batteries from the
remote control. Otherwise, battery solution may leak and damage the
panel.
In case of normal operation of the conditioner, the average service life of
batteries is 6 months.
Replace the batteries, if command receiving is not confirmed by an audio
signal or if the display does not indicate a command transfer sign.
When generating commands from the remote control, point an infrared
radiator to the signal receiver on the internal unit. Hold the remote control
at the distance of no more than 8 m from the internal unit.
The remote control will not work, if there are curtains, doors or other
objects between it and the internal unit. Prevent contact of the remote
control with water and do not expose it to direct sunlight and heat sources.

Содержание

Похожие устройства

Скачать