Timberk T-AC07-S25 [21/56] Maintenance

IM2019

Note: In the fan operation mode, the temperature settings are non-effective.

Cooling/Heating mode

1. Press the MODE button, select the Cooling or Heating operation mode.

2. Press “COLD” or “HEATING” buttons to operate these modes quickly.

3. By pressing the « » or « » button, you can set the temperature range from 16°C (60°F)

~ 32°C (90°F), the display changes as you touch the button.

4. By pressing the SPEED button, you can select the fan speed from LOW, MID, HIGH, AUTO.

5. Press the ON/OFF button, the air-conditioner starts to operate.

6. Press the ON/OFF button again, the air-conditioner stops.

Note: In the fan operation mode, the temperature settings are non-effective.

Fan operation mode

1. Press the MODE button, select the fan operation mode.

2. By pressing the SPEED button, you can select the fan speed from AUTO; LOW; MEDIUM;

HIGH.

3. Press the ON/OFF button, the air-conditioner starts to operate.

4. Press the ON/OFF button again, the air-conditioner stops.

Note: In the fan operation mode, the temperature settings are non-effective.

Drying operation mode

1. Press the MODE button, select the drying operation mode.

2. Press the ON/OFF button, the air-conditioner starts to operate.

3. Press the ON/OFF button again, the air-conditioner stops.

11. MAINTENANCE

Before cleaning unplug the conditioner.

Cleaning of the indoor unit and remote control board:

• Indoor unit and remote control should be cleaned with a dry soft cloth.

• If the indoor unit is too unclean, moisten the cloth and squeeze it well.

• In order to avoid the damage of paint or parts of the conditioner, do not clean it with brushes

and do not leave them on the surface of indoor unit.

• In order to avoid the damage of surface or deformation of the conditioner parts, do not clean it

with petrol, solvents, cleaning powders or other chemically active substances.