Timberk T-AC09-S27 Руководство по эксплуатации онлайн [8/56] 706419

IM2019

Requirements for Installation position:

 Avoid places of inflammable or explosive gas leakage or where there are strongly

aggressive gases.

 Avoid places subject to strong artificial electric/magnetic fields.

 Avoid places subject to noise and resonance.

 Avoid severe natural conditions (e.g. heavy lampblack, strong sandy wind, direct sunshine

or high temperature heat sources).

 Avoid places within the reach of children.

 Select where it is easy to perform service and repair and where the ventilation good.

 The outdoor unit shall not be installed in any way that could occupy an aisle, stairway, exit,

fire escape, catwalk or any other public area.

 The outdoor unit shall be installed as far as possible from the doors and windows of the

neighbors as well as the green plants.

Requirements of the mounting structure:

 The mounting rack must meet the relevant national or industrial standards in terms of

strength with welding and connection areas rustproofed.

 The mounting rack and its load carry surface shall be able to withstand 4 times or above

the weight of the unit.

 The mounting rack of the outdoor unit shall be fastened with expansion bolt.

 Ensure the secure installation regardless of what type of wall on which it is installed, to

prevent potential dropping that could hurt people.

Electrical Safety Requirements:

 Be sure to use the rated voltage and air conditioners dedicated circuit for the power supply,

and the power cable diameter must meet the national requirements.

 If the rated current of the device is greater than or equal to 16A, it is necessary to use a

connection to the mains with the organization of an individual line and install an ELCB. For

the connecting line, a cable with a cross section of 1.5-2 mm

and circuit breakers are

used.

 The minimum clearance between the air conditioner and the combustibles is 1.5 m.

 The interconnection cord enables connect the indoor and outdoor units. You must first

choose the right cable size before preparing it for connection.

 Cable Types:

Indoor Power Cable (if applicable): H05VV-F;

Interconnection cord: H07RN-F or H05RN-F;