Timberk T-AC12-S25 [22/56] Wiring diagrams

Before a long break in use of the conditioner:

• Turn the conditioner on for several hours in the FAN mode. It will dry its inner cavities

• Unplug the conditioner.

• Remove the batteries from the remote control.

Checks before starting:

• Make sure that an air filter is installed.

• Make sure that air inlet and outlet grilles of the outdoor unit are not blocked by foreign objects.

Cleaning of air filter:

• Air filter cleans the air entering the conditioner from dust and foreign particles. If the filter is

contaminated, the conditioner capacity decreases sharply.

• If the conditioner is operated permanently, the filter should be cleaned once per two weeks.

• If the conditioner is installed in a room with dusty atmosphere, then the air filter should be

cleaned more often.

• To remove the filter, open the indoor unit panel.

• Remove air filters. Clean the filter with a vacuum cleaner. If the filter is contaminated heavily,

clean it with a soft brush and wash in diluted washing solution, then dry it in a cool place.

• While cleaning the filter with the vacuum cleaner, hold it with contaminated surface up. While

washing the filter in water, hold it with contaminated surface down.

• Do not dry the filter in the sun or near fire.

• Set the air filter to initial position and close the panel.

12. WIRING DIAGRAMS

T-AC07-S25-Y, T-AC09-S25-Y, T-AC12-S25-Y, T-AC18-S25-Y, T-AC24-S25-Y