Timberk T-AC18-S29 Руководство по эксплуатации онлайн [17/52] 706427

IM2020

1. POWER - Turns the air conditioning on / off.

2. MODE - Selecting the operating mode: AUTO – COOL - DRY - HEAT - FAN.

3. SPEED - Selection of the ventilation speed according to the scheme: LOW - MID - HIGH -

AUTO.

Note: AUTO air speed is not available in ventilation mode.

4,5. Buttons «Up», «Down». The «Up» button (4) - the temperature will rise by 1 °C. The

«Down» button (5) - the temperature will drop by 1 °C. The temperature setting range is from

16°C (60°F) to 32°C (90°F).

6. SWING - Horizontal rotation mode. Controlling the direction of the airflow horizontally. Press

this button to turn the louver left/right (in this model the function is not provided).

7. SWING - Vertical rotation mode. Controlling the direction of the airflow vertically. Press this

button to turn the louver up/down.

8. TURBO - Automatic operation of maximum cooling (in cooling mode) or maximum heating (in

heating mode).

9. TIMER - Setting the on/off time of the air conditioner by timer

10. iFAVOR - Return the device to the user’s previous personal settings (option is not supplied

in this model).

11. iFeel - Click this button to display temperature settings in the control panel for a comfortable

temperature. The remote-control sensor measures temperature of the room and sends data to

the indoor-unit. So set temperature is established near the remote-control, not near the indoor

unit. The second press adjusts the pre-set temperature.

12. HEALTH - Activating the ionization function (option is not supplied in this model).

13. SLEEP - Click it and temperature will decrease on 2 degrees during 10 hours. After this time

expires, the device will return to automatic mode. The speed of fan also gets lower, so the noise

level decreases too.

14. iCLEAN - Press "iCLEAN" when the device is OFF, the remote control will display “CL” and

the air conditioner will start the cleaning function. This function gives opportunity to prevent

fungus appearance and bad smell by drying moisture from evaporator (using drying, purging and

heating the module), which increases the efficiency of cooling and heating. iCLEAN mode works

for about 30 minutes.