Timberk T-AC24-S28 Руководство по эксплуатации онлайн [20/52] 706430

IM2019

3. Press the ON/OFF button again, the air-conditioner stops.

BACKLIGHT FUNCTION (for remote controllers with such function only)

The remote control has a backlight which can be turned on by pressing any button for the

convenience of operation in darkness. The backlight will be automatically turned off if there is no

operation within 10 seconds.

11. MAINTENANCE

Before cleaning unplug the conditioner.

Cleaning of the indoor unit and remote control board:

• Indoor unit and remote control should be cleaned with a dry soft cloth.

• If the indoor unit is too unclean, moisten the cloth and squeeze it well.

• In order to avoid the damage of paint or parts of the conditioner, do not clean it with brushes

and do not leave them on the surface of indoor unit.

• In order to avoid the damage of surface or deformation of the conditioner parts, do not clean it

with petrol, solvents, cleaning powders or other chemically active substances.

Before a long break in use of the conditioner:

• Turn the conditioner on for several hours in the FAN mode. It will dry its inner cavities.

• Unplug the conditioner.

• Remove the batteries from the remote control.

Checks before starting:

• Make sure that an air filter is installed.

• Make sure that air inlet and outlet grilles of the outdoor unit are not blocked by foreign objects.

Cleaning of air filter:

• Air filter cleans the air entering the conditioner from dust and foreign particles. If the filter is

contaminated, the conditioner capacity decreases sharply.

• If the conditioner is operated permanently, the filter should be cleaned once per two weeks.

• If the conditioner is installed in a room with dusty atmosphere, then the air filter should be

cleaned more often.

• To remove the filter, open the indoor unit panel.

• Remove air filters. Clean the filter with a vacuum cleaner. If the filter is contaminated heavily,

clean it with a soft brush and wash in diluted washing solution, then dry it in a cool place.

• While cleaning the filter with the vacuum cleaner, hold it with contaminated surface up. While

washing the filter in water, hold it with contaminated surface down.

• Do not dry the filter in the sun or near fire.

• Set the air filter to initial position and close the panel.