Timberk THU UL 25 [5/24] List of parts
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Timberk THU UL 25 [5/24] List of parts

Timberk THU UL 25 [5/24] List of parts
www.timberk.com • electric humidifier
5
5. LIST OF PARTS
1. Air humidifier – 1 pc.
2. Instruction manual and warranty card - 1 pc.
3. Package – 1 pc.
6. FILLING THE TANK WITH WATER
Always unplug the unit before removing the water tank. Do not touch the
water in the base during operation.
• Remove the water tank from the base and unscrew the water tank cap.
• Make sure that no foreign objects are in the water tank.
• Fill the tank with clean, cold water from the tap. Close the cap of the
water tank securely; place the water tank onto the base.
• Do not pour water into the mist outlet of the appliance.
• Insert the plug into the socket and switch on the appliance using the on/
off dial.
Connect the appliance to the mains, reservoirs filled with water beforehand.
Сlick on the main switch (fig.2), the device will start to work automatically.
At the very beginning of operation, the atomizing level may appear
unstable, which is caused by the temperature difference and water quality.
It takes some time for water to start turning into steam on the ultrasonic
membrane. After 10-25 minutes the atomizing level will gradually stabilize.
The humidifier is equipped with a backlight. light switch located on the
7.APPLIANCE OPERATION
8. CLEANING AND MAINTENANCE
• Always unplug the unit before removing the water tank.
• Do not touch the water in the base during operation!
• Caution-risk of electric shock and damage of the product!
• Switch off the appliance and unplug it from the socket before cleaning it.
Clean the water tank and the base regularly. Use water only, no detergents.
IMPORTANT!
To avoid deformation or wear of working surfaces,
resulting in decreased atomizing or other malfunctions,
do not use metallic brushes, blades or talc powder
to wipe the atomizer’s surface. The water tank may
leak upon heavy impacts. In case of water leakage,
immediately stop using the unit and contact a service
center. To keep the unit dry, remove water after cleaning
and make sure to dry the unit’s case. Make sure that
there is no water left inside the unit’s case. Prior to a long
break in using the unit, dry its surface and pack it into
a plastic bag, then put it into a box. Store the unit in a
low-humidity room. Storing the unit undried results in
generation of mold
Fig. 2 Fig. 3
bottom of the base unit. To turn on the backlight, set top light switch (Figure
3) to the «symbol of light bulb» to turn the upper and lower backlight, set
the light switch to the «symbol of a dark light bulb.» To turn off the backlight,
set the power switch to «OFF».
By lowering the water level in the reservoir below the minimum ultrasonic
device will automatically turn off the membrane. To continue the operation
of the device is necessary to fill the water tank according to claim 6, «Filling
the tank with water», then connect the device to the mains.
To turn off the unit, press the power switch and disconnect the device from
the mains.

Содержание

Похожие устройства

Скачать