Karcher WD 4.200 [11/126] Maintenance and care

Karcher WD 4.200 [11/126] Maintenance and care
– 3
Always work with an inserted cartridge
filter - during wet as well as dry vacu-
um cleaning!
Illustration
Mount loose parts delivered with appli-
ance prior to start-up.
Illustration
Recommendation: To vacuum fine dust,
use the filter bag.
Illustration
Connect accessories.
Illustration
Plug in the main plug.
Illustration
Turn on the machine.
Work only with a dry cartridge filter!
Recommendation: To vacuum fine dust, use
the filter bag.
(see description / illustration )
The filling level of the filter bag depends
on the dirt that is sucked in.
The filter bag needs to be replaced more fre-
quently while sucking in fine dust, sand, etc.
Clogged filter bags can burst - therefore
make sure to replace the filter bag in a
timely manner!
Caution: Always use a pre-separator
while vacuuming ashes and soot (order
no. 2.863-139).
Attach the accessories to vacuum mois-
ture or wetness to the suction pipes or di-
rectly to the handle.
Caution:
Do not use a filter bag!
Immediately switch the appliance off if foam
forms or liquids escape!
Note: If the container is full a float closes the
suction opening and the appliance works at a
higher speed. Switch off the appliance imme-
diately and empty the container.
Cleaning hard to reach locations or, where
vacuuming is not possible, like leaves from a
gravel bed.
Illustration
Connect the suction hose to the blower
connection, this will activate the blower
function.
Turn off the appliance.
Illustration
Hook the floor nozzle into the parking po-
sition.
Turn off the appliance and disconnect the
mains plug.
Illustration
Remove the appliance head and empty
the reservoir.
Illustration
Stow away the mains cable, the mains ca-
ble retraction and accessory in the appli-
ance.
Store the appliance in a dry room.
Danger
Turn off the appliance and remove the mains
plug prior to any care and maintenance work.
Repair works may only be performed by the
authorized customer service.
Caution
Do not use abrasives, glass or universal clean-
ers! Never immerse the appliance in water.
Clean the appliance and accessory parts
made of plastic with a commercial plastic
cleaner.
If required, rinse the container and acces-
sories with water properly and dry them
before reuse.
Illustration
Only clean the cartridge filter under run-
ning water; do not wipe or brush. Let it dry
completely prior to installation.
Operation
Before Startup
Start up
Dry vacuum cleaning
Wet vacuum cleaning
Blowing function
Interrupting operation
Finish operation
Empty the container
Storing the appliance
Maintenance and care
11EN

Содержание

Скачать
Случайные обсуждения

Ответы 1

Хепа фильтр где в нем находится?
4 года назад

Ответы 1

Немогу найти в нем хепа фильтр
4 года назад

Ответы 1

Страна производитель?
4 года назад

Ответы 1

Бьет статикой как избавится?
4 года назад