AEG S 75438 KG [6/24] Switching off

2 Fridge temperature indicator

3 Buttons for setting fridge temperature

4 Fridge thermometer indicator (with COOLMATIC)

5 MODE button

6 Display

7 RESET switch

8 Freezer compartment indicator

9 Freezer temperature indicator

10 Buttons for setting freezer temperature

11 Freezer thermometer indicator (with FROSTMATIC)

Switching on

Plug the plug into the power outlet.

The display is illuminated, the appliance is on.

As soon as the appliance is turned on, it is in alarm condition, the temperature flashes and

you will hear a buzzer.

Press the RESET switch and the buzzer will go off (refer to "High temperature alarm" ) and

on the temperature indicator will appear the warmest temperature reached.

For a correct storage of the food the following temperatures should be set:

+5°C in the fridge

-18°C in the freezer

To select a different temperature refer to "Temperature regulation".

Wait until the inside compartment temperature reach -18°C, before introducing the goods

in the freezer compartment.

Switching off

To switch the appliance off do these steps:

1. Remove the mains plug.

If the appliance is not going to be used for an extended period:

1. Remove the mains plug or turn out the circuit breaker or fuse.

2. Defrost and clean the appliance thoroughly.

3. Finally, leave the doors open so as to avoid a build up of odours.

Temperature setting buttons

The temperature is adjusted using the temperature setting buttons. These buttons are con-

nected to the temperature indicator.

• The temperature indicator is switched over from the indicator of the ACTUAL tempera-

ture (Temperature indicator is illuminated) to the indicator of the DESIRED temperature

(Temperature indicator flashes) by pressing one of the Temperature setting buttons.

• Each time one of the two buttons is pressed again the DESIRED temperature is adjusted

by 1°C. The DESIRED temperature must be reached within 24 hours.

If neither button is pressed, the temperature indicator automatically switches back after a

short period (approx. 5 sec.) to the indicator of the ACTUAL temperature.

DESIRED temperature means:

Control panel