Vitek VT-1478 W [8/56] English
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Vitek VT-1478 W [8/56] English

Vitek VT-1478 W [8/56] English
8
ENGLISH
disconnect the motor unit (4) from the
gearbox-cover (9), then remove the
cover (9) from the bowl (11), by turning
it anticlockwise.
7. Carefully turn the blade (10) clockwise/
anticlockwise to release it from axis and
remove the blade.
8. Remove the products from the chopper
bowl (11).
9. Clean and wash all the details immedi-
ately after you stop operating the unit.
Attention! Chopping time of “hard prod-
ucts” should not exceed 10 seconds,
chopping time of products without wa-
ter – 5 second, and then you should
make a 1-minute interval.
USING THE SHREDDER AND THE
GRATERS (PIC.4)
1. Insert the shredder (16) or the graters
(23) into the holder (17) until clamping.
2. Put the holder (17) on the axis of the
processor bowl (19). Always use the
processor bowl (20) with the anti-slip
support (21).
3. Put the cover (15) on the bowl (20).
4. Press the clamp button (19) and turn the
cover (15) clockwise, by matching the ar-
row on the button with the “LOCK” mark
on the cover, release the button (19).
5. Insert the motor unit (4) into the gear-
box-cover (15) until clamping.
6. Insert the power plug into the socket.
7. Use the control (1) to set the required
speed 1-5. To switch on the proces-
sor press and hold the button (2). When
pressing the button (3) the shredder or
the graters will be rotating at the maximal
speed.
8. To supply products through the throat of
the cover (15) use the pusher (22). Do
not press the pusher (22) too hard.
Note:
Do not push the products into the throat
(15) with your fingers or other objects.
Use only the pusher for this purpose
(22).
9. After operation unplug the unit, press
the buttons (5) and disconnect the mo-
tor unit (4) from the gearbox-cover (15).
Then press the button (19), turn the
cover (15) anticlockwise and remove the
cover (15) from the bowl (20).
10.Carefully remove the holder (17).
11.Remove the products from the bowl
(20).
Attention!
Time of continuous operation should
not be more than 10-15 seconds, after
which wait 1 minute.
12.Clean and wash all the details immedi-
ately after you stop operating the unit.
USING THE BLADE (18) (Pic. 5)
1. Put the blade (18) on the axis of the proc-
essor bowl (20). Always use the proces-
sor bowl (20) with the anti-slip support
(21).
2. Put the products into the bowl (20).
2. Put the cover (15) on the bowl (19).
3. Press the clamp button (19) and turn
the cover (15) clockwise, by matching
the arrow on the button with the “LOCK”
mark on the cover, release the button
(19).
4. Insert the motor unit (4) into the gear-
box-cover (15) until clamping.
5. Insert the plug into the socket.
6. Use the control (1) to set the required
speed 1-5. To switch on the proces-
sor press and hold the button (2). When
pressing the button (3) the blade will be
rotating at the maximal speed.
7. During operation you can add products
into the bowl (20) through the throat of
the cover (15).
8. After operation unplug the unit, press
the buttons (5) and disconnect the mo-
tor unit (4) from the gearbox-cover (15).
1478.indd 8 01.12.2011 14:20:55

Содержание

Похожие устройства

Скачать