Sencor SVC 730GR ALTO [5/8] Vacuum cleaner

Sencor SVC 730GR ALTO [5/8] Vacuum cleaner
Vacuum cleaner
SVC 730RD / SVC 730GR
EN
05/2012
Using your accessories
The narrow slot nozzle may be used to vacuum in hard to reach spaces such as window
frames, libraries, upholstery corners, joints, etc.
Pillow nozzle may be used for bed vacuuming or upholstered furniture, etc.
Tip:
Use the narrow nozzle with brush to vacuum in hard to reach spaces that may be scratched easily!
Ending the vacuuming process
At fi rst, switch the vacuum cleaner off by pressing the START / STOP button 1 and then disconnect
the supply cable plug from the wall outlet.
Hold the cable with one hand during the winding process. With your other hand press and hold the
winding button 4. „Lead" the cable towards the winding mechanism to protect the vacuum cleaner
input area from damages.
Tip:
If the winding process stops and part of the supply cable is still outside, release the winding
button 4 and pull the cable out again by about 50 cm and press the winding button again and
repeat the winding process.
Carrying your vacuum cleaner
Your appliance may be carried from place to place by holding it by handle 3.
Warning:
Never try to carry your vacuum cleaner by holding the dust container handler5!
STORAGE AND ACCESSORIES
Before storage you may disassemble your appliance to each individual part or you may store it
assembled and with the telescopic tube 9 stored in one of the „parking" positions (the rear or front
position)
MAINTENANCE AND CLEANING
Emptying the dust container 5
Disconnect the hose 6 from the vacuum cleaner.
Pull the handle 3 up and remove the dust container 5.
Place the dust container 5 above a waste bin
Press the safety button underneath the suction opening 5 and the dust bottom will open.
Dust and dirt may be put in regular household waste.
Also remove the dust fi lter from the dust container 5. Turn the fi lter partially and empty the
remaining dirt and dust from the fi lter to the waste bin as well.
Install the dust fi lter back to the dust container 5 and secure it in place by turning the fi lter to the
opposite direction.
Close the bottom lid of the container 5. Make sure the safety lock button is engaged.
Place the dust container 5 back to the vacuum cleaner.
Warning:
Before installing the dust container 5 and the dust fi lter back to your appliance, make sure that
both the container and the fi lter are completely dry.
Скачать