Sencor SHF 1005 [4/8] Humidifier

Humidifier SHF 1005 PRODUCT DESCRIPTION Nozzle for steam release transducer surface for the condensation of water not illustrated it is located at the bottom of the water flume Steam outlet Water tank holder water tank water tank cap Water flume Water level detector Base PREPARATION FOR USE 1 Check that the humidifier is turned off and disconnected from the power socket 2 Place the humidifier on a even surface approximately 60 cm above the floor level and 10 cm away from the wall We recommend that you do not place the humidifier on valuable furniture 3 Instructions for filling the water tank Remove the water tank by holding the handles and lifting it directly upwards Unscrew the water tank cap on the underside of the tank in the anti clockwise direction and fill the tank with cold tap water After filling the water tank return the cap back to its position and firmly screw into place in the clockwise direction and return the water tank back into the base of the appliance The tank will immediately start to empty itself into the base 4 Connect the power cord to a power point with the nominal voltage Warning Cl Do not pour warm water into the tank Never remove the water tank if the humidifier is running and connected to the electrical outlet During operation never touch the water condensation surfaces EN 4 Copyright 2013 Fast CR a s Revision 01 2013