Philips HR1894 [11/60] English

Problem Solution

The appliance does

not work.

The appliance is equipped with two safety pins. If either the juicing unit

or the pulp container has not been placed on the motor unit properly,

the appliance does not work. Check whether these parts have been

assembled in the right way (see chapter ‘Preparing for use’), but switch

off the appliance before you do so.

The motor unit gives

off an unpleasant smell

the rst few times the

appliance is used.

This is not unusual. If the appliance continues to give off this smell after

a few times, check the quantities you are processing and the processing

time.

The juicing unit cannot

be placed onto the

motor unit.

Check if the spout is properly attached to the juicing unit. Make sure that

the projections on the juicing unit are aligned with the recesses in the

motor unit (see g. 9).

The juicing unit is

blocked.

Press the pre-clean button for a few seconds. If the juicing unit is still

blocked, then switch off the appliance, remove the juicing unit and

disassemble all parts. Remove the fruit that is blocking the juicing unit.

Then process a smaller quantity.

HR1899/HR1897/

HR1896: The power-

on light ashes.

The juicing unit is blocked. Press the pre-clean button for a few seconds.

If the juicing unit is still blocked, then switch off the appliance, remove the

juicing unit and disassemble all parts. Remove the fruit that is blocking

the juicing unit. Then process a smaller quantity.

ENGLISH 11