Home
Главная
Philips
Утюги
HI565
Руководство по эксплуатации Страница: 6

Philips HI565 Руководство по эксплуатации онлайн [6/98] 733067

Filling with water (for steam-ironing and

spraying)

• You can fill this iron

with normal tap

water.

- Remove the mains

plug from the wall

socket before filling

the iron with water.

- Set the steam control

(B) to position O (= no

steam).

- Set the 3-positions

switch to position ∫

(fig. 9) and take the

cordless iron from the

stand (fig. 10).

- Stand the iron upright

and open the filling

funnel. Pour water

into the filling funnel

to a maximum of 230

ml (fig. 11). Use the

measuring beaker

with spout for this

purpose.

- Close the filling

funnel.

Ironing temperature

• Always check first to see whether a label with

ironing instructions is attached to the article to

be ironed. (See table.)

Follow these ironing instructions in all cases.

• If ironing instructions are missing but you know

the kind of fabric, then refer to the fabric table.

• The fabric table is valid for the materials only

and is not applicable to any applied finish,

gloss etc.

Fabric to which some kind of finish has been

applied (gloss, wrinkle, relief etc.) can best be

ironed at lower temperatures.

• Sort the laundry out according to ironing

temperature first: wool with wool, cotton with

cotton, etc.

• The iron heats up quicker than it cools down.

Therefore, start ironing the articles requiring

the lowest temperature such as those made of

synthetic fibres.

• If the fabric consists of various kinds of fibres,

you must always select the lowest ironing

temperature for the composition of those fibres.

(E.g. an article consisting of “60% polyester and

40% cotton” should be ironed at the temperature

indicated for polyester (1) and without steam.)

If you do not know the kind(s) of fabric(s) the

article has been made from, find a spot which

will be invisible when wearing or using the

article. Try out the ironing temperature which is

most suitable there. (Start at a relatively low

temperature.)

• Pure woollen fabrics (100% wool) may be

pressed with the iron set to a steam position.

Preferably set the steam control to maximum

position and use a dry pressing cloth.

When steam-ironing woollen fabrics, shining of

the fabric may occur. This can be prevented by

turning the article inside out and ironing the

reverse side.

• Velvet and other textures which rapidly acquire

shiny spots should be ironed in one direction

only (with the nap) applying light pressure.

Always keep the iron moving.

• Silk and other fabrics likely to become shiny

should be ironed on the reverse side. To

prevent staining do not use the spray on silk or

other delicate fabrics.

Setting the temperature

- Place the iron on the stand (fig. 12).

- Set the appropriate ironing temperature

indicated in the ironing instructions or in the

fabric table by means of the temperature dial

(fig. 13).

- Insert the mains plug

into the wall socket.

Pilot light (H) will now

come on (fig. 14).

- When the amber pilot

light (H) has gone out

and has come on

again you can start

ironing.

• The amber pilot light (H) will come on from time

to time during corded ironing.

• If you set the temperature control to a lower

setting after ironing at a high temperature, do

not recommence ironing before the amber pilot

light (H) first has come on and then has gone

out again.

MAX

HI 565/66

Philips HI565 Руководство по эксплуатации онлайн [6/98] 733067

Содержание

Похожие устройства