Home
Главная
Vitek
Утюги
VT-1236 VT
Инструкция по эксплуатации Страница: 6

Vitek VT-1236 VT [6/56] English

ENGLISH

Water spray

• You can dampen the fabric by pressing the

water spray button (5) several times.

• Make sure that there is enough water in the

water tank (9).

DRY IRONING

• Place the iron on its base (8).

• Insert the power plug into the mains socket.

• Turn the control knob (10) to set the required

ironing temperature: «•», «••», «•••» or

«MAX», depending on the type of fabric, the

pilot lamp (7) will light up.

• Set the continuous steam supply knob (3)

to the position «

» (continuous steam sup-

ply is off).

• When the soleplate reaches the set temper-

ature, the pilot lamp (7) will go out, you can

start ironing.

• After you finish ironing, set the temperature

control knob (10) to the position «MIN». Pull

the power plug out of the mains socket and

let the iron cool down completely.

STEAM IRONING

Steam ironing is possible only if the temperature

control knob (10) is set to the position «••»,

«•••» or «MAX».

The iron is provided with an anti-drip valve that

stops water supply if the soleplate temperature

is too low; it prevents dripping from the soleplate

openings (13). During heating and cooling of

the iron soleplate, you will hear characteristic

clicks of the anti-drip valve opening/closing,

which indicates its normal operation.

• Place the iron on its base (8).

• Insert the power plug into the mains socket.

• Make sure that there is enough water in the

water tank (9).

• Turn the control knob (10) to set the required

ironing temperature: «••», «•••» or «MAX»,

the pilot lamp (7) will light up.

• When the soleplate (13) reaches the set

temperature, the pilot lamp (7) will go out,

you can start ironing.

• Set the necessary steam intensity with the

continuous steam supply knob (3).

• In the continuous steam supply mode,

steam will be released from the openings of

the soleplate (13) only if the iron is in hori-

zontal position. To stop the steam supply,

put the iron vertically or set the knob (3) to

the position «

».

• After you finish ironing, set the temperature

control knob (10) to the «MIN» position and

the continuous steam supply knob (3) to

the position «

». Pull the power plug out of

the mains socket and let the iron cool down

completely.

ATTENTION!

If no continuous steam supply occurs during

operation, check whether the temperature

control knob (10) and the steam supply knob

(3) are set properly and whether there is water

in the water tank (9).

BURST OF STEAM

The burst of steam function is useful when

ironing of folds and can only be used at high

ironing temperatures (when the temperature

control knob (10) is set to «MAX» position).

When the burst of steam button (4) is pressed,

steam will go out of the soleplate intensively.

Note: To avoid water leakage from the steam

openings, press the burst of steam button (4)

with 4-5 sec. intervals.

VERTICAL STEAM

The vertical steam function can be used

only at high ironing temperatures (when the

temperature control knob (10) is set to the

«MAX» position).

Wait till the iron soleplate heats up, hold the

iron vertically at the distance of 10 to 30 cm

from the clothes and press the burst of steam

button (4) with intervals of 4-5 seconds, steam

will be released from the soleplate openings

intensively. To avoid dripping, do not perform

vertical steam when the soleplate is heating up

(when the pilot lamp (7) is on).

Important information

• Vertical steam is not recommended for syn-

thetic fabrics.

• To avoid fabric melting, do not touch it with

the iron soleplate while steaming.

• Never steam clothes on a person, as the

steam temperature is very high, use a

clothes hanger or a stand.

VT-1236.indd 6 02.12.2013 9:20:53

Vitek VT-1236 VT [6/56] English

Содержание

Похожие устройства