Fellowes Voyager 125 A3 [10/11] Storage external cleaning

Switch off the machine at the wall. Allow the machine to cool.

The outside of the machine can be cleaned with a damp cloth. Do not use solvents or flammable materials to polish the machine.

Cleaning sheets can be used with the machine. When the machine is warm – run the sheets through the machine to clean any residue

off the rollers. For advanced Cleaning of the inside of the laminator, please see the section on the CleanMe function above. Use Fellowes

Laminator wipes (#57037) only for the internal cleaning.

Problem Possible cause Solution

No symbols showing in LCD screen Machine is not switched on

Switch on machine at rear next to plug inlet

and at the wall socket, then press standby

button to left of LCD screen

operation)

Use AutoLam setting or check that pouch

thickness is correctly selected and pass

through again

Item comes out the front of laminator again Item too thick to laminate Choose thinner pouch and try again

Machine speed and noise varies during

lamination

Items of different thickness laminated

No problem – AutoLam automatically

senses the thickness of inserted pouch and

uses optimum settings

Select reverse button and pull out the

item by hand or open laminator manually

via the LCD and follow steps described in

CleanMe

Jamming

Pouch was used ‘open end’ first

Pouch was not centered & straight on entry

Empty pouch was used

Pouch is damaged after lamination Damaged rollers or adhesive on rollers

Open laminator manually via the LCD and

follow steps described in CleanMe

STORAGE & EXTERNAL CLEANING

TROUBLESHOOTING

10