Centek CT-65R24 [37/48] Рис 6

Centek CT-65R24 [37/48] Рис 6
36
Рис. 4
left-hand side Right side
Figure 4
Рис. 5
pvc tube
slight slope
premises
wall
premises
wall cover
Figure 5
INDOOR UNIT INSTALLATION
You can lead the connecting tubes out of the indoor unit on both sides
as shown in Fig. 7. Choose the most appropriate side.
1. Tube connections on the right side
Pull the hose from the lower part of the chassis and connect the
drain tube.
Securely fasten the hose connection.
Connect the signal cable to the inner unit (do not connect the power
supply).
Place the connecting tubes, cable and drain hose as shown in Fig. 6,
then connect the drain hose to the drain port. The drain hose should
extend with a slight downward gradient. Bundle the connecting
tubes, cables and drain hose together with vinyl tape. Ensure a
sufficient space between the drain hose and the ground. Do not put
the drain tube into water or a ditch.
2. Tube connections on the left side
Move the outlet tube to the left side and remove the cover on the
right side. Fasten the tubes in the recess of the indoor unit with a
clamp.
Perform further steps as in the previous section.
Note:
Hang the indoor unit on the mounting plate and ensure that it is
centered on it.
Shift the indoor unit left and right until its hooks firmly sit in the
recesses (a click should be heard).
Соединительные провода
Трубопровод
Сливная труба
Рис. 6
Pipe
Connecting wires
Drain pipe
Figure 6
Сливной шланг
Рис. 7
Низ
Правый
угол
Фиксатор
Левый
угол
Левый край
Drain hose
right edge
bottom
right
corner
retainer
left corner
left edge
Figure 7
стена
Рис. 8
Монтажная плата
circuit board
wall
Figure 8
Сливной шланг
Фиксатор
Рис. 9
retainer
Figure 9

Содержание

Похожие устройства

Скачать
Случайные обсуждения