Aten CS1964 [6/16] Rs 232 commands

CS1964 RS-232 Commands

RS-232 Commands

After you login via HyperTerminal (see Console Login - HyperTerminal) use

the instructions below to send RS-232 commands to control the switch from the

computer.

When RS-232 control is enabled via the Open + [Enter] command, the

CS1964’s front panel pushbuttons, mouse switching and hotkeys will be

disabled.

For detailed information about the controls listed in this guide, please refer to

the CS1964 user manual.

Verification

After entering a command, a verification message appears, as shown below, at

the end of the command line, as follows:

With all commands in the sections that follow:

 Each command string can be separated with a space.

 The [Enter] command can be replaced with the ASCII code: 0x0D0A

Response Message Description

Command OK Command or parameter is correct.

Command incorrect Command or parameter is incorrect.